MODEL: MTD
3: 0 – 1 V DC (Input resistance 1 MΩ min.)
Plug-in Signal Conditioners M-UNIT
4: 0 – 10 V DC (Input resistance 1 MΩ min.)
5: 0 – 5 V DC (Input resistance 1 MΩ min.)
6: 1 – 5 V DC (Input resistance 1 MΩ min.)
4W: -10 – +10 V DC (Input resistance 1 MΩ min.)
0: Specify voltage (See INPUT SPECIFICATIONS)
PULSE DURATION TRANSMITTER
Functions & Features
• Converting a DC input into an output pulse
• The duration or "ON" time is linearly proportional to the
input analog signal amplitude
OUTPUT
• Frame duration adjustable
4: 24 V voltage pulse
• High-density mounting
Typical Applications
[2] POWER INPUT
AC Power
• Transmission or telemetering
• Proportional ON-OFF control to operate solenoid valves or
other similar final control elements
K: 85 – 132 V AC
(Operational voltage range 85 – 132 V, 47 – 66 Hz)
L: 170 – 264 V AC
50
(1.97)
(Operational voltage range 170 – 264 V, 47 – 66 Hz)
[3] OPTIONS
80
blank: none
(3.15)
/Q: With options (specify the specification)
127
(5)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
mm (inch)
/C02: Polyurethane coating
MODEL: MTD–[1]4–[2][3]
/C03: Rubber coating
TERMINAL SCREW MATERIAL
/S01: Stainless steel
ORDERING INFORMATION
• Code number: MTD–[1]4–[2][3]
Specify a code from below for each of [1] through [3].
(e.g. MTD-A4-K/Q)
GENERAL SPECIFICATIONS
Construction: Plug-in
• Special input range (For codes Z & 0)
• Specify the specification for option code /Q
(e.g. /C01/S01)
Connection: M3.5 screw terminals
Screw terminal: Chromated steel (standard) or stainless
steel
Housing material: Flame-resistant resin (black)
Frame duration: 0.1 – 102.4 sec. adjustable
Preselection: Front-accessed rotary switch
Fine adjustment: Front-accessed potentiometer
Isolation: Input to output to power
Zero adjustment: 0 – 20 % (front)
Span adjustment: 80 to 100 % (front)
[1] INPUT
Current
A: 4 – 20 mA DC (Input resistance 250 Ω)
A1: 4 – 20 mA DC (Input resistance 50 Ω)
B: 2 – 10 mA DC (Input resistance 500 Ω)
C: 1 – 5 mA DC (Input resistance 1000 Ω)
D: 0 – 20 mA DC (Input resistance 50 Ω)
E: 0 – 16 mA DC (Input resistance 62.5 Ω)
F: 0 – 10 mA DC (Input resistance 100 Ω)
G: 0 – 1 mA DC (Input resistance 1000 Ω)
H: 10 – 50 mA DC (Input resistance 100 Ω)
Z: Specify current (See INPUT SPECIFICATIONS)
Voltage
INPUT SPECIFICATIONS
■ DC Current:
Shunt resistor attached to the input terminals (0.5 W)
Specify input resistance value for code Z.
■ DC Voltage: -300 – +300 V DC
Minimum span: 10 mV
1: 0 – 10 mV DC (Input resistance 10 kΩ min.)
2: 0 – 100 mV DC (Input resistance 100 kΩ min.)
Offset: Max. 1.5 times span
Input resistance
MTD SPECIFICATIONS
ES-1378 Rev.10 Page 1/4
http://www.m-system.co.jp/