5秒后页面跳转
MSP430P337AIPJM PDF预览

MSP430P337AIPJM

更新时间: 2024-11-22 22:26:31
品牌 Logo 应用领域
德州仪器 - TI 微控制器和处理器外围集成电路PC可编程只读存储器时钟
页数 文件大小 规格书
30页 391K
描述
MIXED SIGNAL MICROCONTROLLERS

MSP430P337AIPJM 技术参数

是否无铅: 含铅是否Rohs认证: 符合
生命周期:Obsolete零件包装代码:QFP
包装说明:QFP, QFP100,.7X.9针数:100
Reach Compliance Code:compliantHTS代码:8542.31.00.01
风险等级:8.62Samacsys Confidence:4
Samacsys Status:ReleasedSamacsys PartID:5267
Samacsys Pin Count:100Samacsys Part Category:Integrated Circuit
Samacsys Package Category:Quad Flat PackagesSamacsys Footprint Name:100 Pin Quad Flat-Pack (QFP)
Samacsys Released Date:2015-05-20 19:17:23Is Samacsys:N
具有ADC:YES其他特性:ALSO OPERATES AT 2.5 TO 5.5V SUPPLY
地址总线宽度:位大小:16
最大时钟频率:3.8 MHzDAC 通道:NO
DMA 通道:NO外部数据总线宽度:
JESD-30 代码:R-PQFP-G100JESD-609代码:e4
长度:20 mm湿度敏感等级:3
I/O 线路数量:46端子数量:100
最高工作温度:85 °C最低工作温度:-40 °C
PWM 通道:YES封装主体材料:PLASTIC/EPOXY
封装代码:QFP封装等效代码:QFP100,.7X.9
封装形状:RECTANGULAR封装形式:FLATPACK
峰值回流温度(摄氏度):260电源:3/5 V
认证状态:Not QualifiedRAM(字节):1024
ROM(单词):32768ROM可编程性:OTPROM
座面最大高度:3.4 mm速度:3.8 MHz
子类别:Microcontrollers最大供电电压:5.5 V
最小供电电压:4.5 V标称供电电压:5 V
表面贴装:YES技术:CMOS
温度等级:INDUSTRIAL端子面层:Nickel/Palladium/Gold (Ni/Pd/Au)
端子形式:GULL WING端子节距:0.65 mm
端子位置:QUAD处于峰值回流温度下的最长时间:NOT SPECIFIED
宽度:14 mmuPs/uCs/外围集成电路类型:MICROCONTROLLER, RISC
Base Number Matches:1

MSP430P337AIPJM 数据手册

 浏览型号MSP430P337AIPJM的Datasheet PDF文件第2页浏览型号MSP430P337AIPJM的Datasheet PDF文件第3页浏览型号MSP430P337AIPJM的Datasheet PDF文件第4页浏览型号MSP430P337AIPJM的Datasheet PDF文件第5页浏览型号MSP430P337AIPJM的Datasheet PDF文件第6页浏览型号MSP430P337AIPJM的Datasheet PDF文件第7页 
MSP430C33x, MSP430P337A  
MIXED SIGNAL MICROCONTROLLERS  
SLAS227 – OCTOBER 1999  
Low Supply Voltage Range 2.5 V – 5.5 V  
Slope A/D Converter Using External  
Components  
Low Operation Current,  
400 A at 1 MHz, 3 V  
16-Bit Timer With Five Capture/Compare  
Registers  
Ultra-Low Power Consumption  
Standby Mode: 2 µA  
Serial On-Board Programming  
RAM Retention Off Mode: 0.1 µA  
Programmable Code Protection by Security  
Fuse  
Five Power-Saving Modes  
Wake Up From Standby Mode in 6 µs  
Family Members Include:  
MSP430C336 – 24 KB ROM, 1 KB RAM  
MSP430C337 – 32 KB ROM, 1 KB RAM  
MSP430P337A – 32 KB OTP, 1 KB RAM  
16-Bit RISC Architecture, 300 ns Instruction  
Cycle Time  
Single Common 32 kHz Crystal, Internal  
System Clock up to 3.8 MHz  
EPROM Version Available for Prototyping:  
PMS430E337A  
Integrated LCD Driver for up to 120  
Segments  
Available in the following packages:  
100 Pin Quad Flat-Pack (QFP),  
100 Pin Ceramic Quad Flat-Pack (CFP)  
(EPROM Version)  
Integrated Hardware Multiplier Performs  
Signed, Unsigned, and MAC Operations for  
Operands Up to 16 X 16 Bits  
Serial Communication Interface (USART),  
Select Asynchronous UART or  
Synchronous SPI by Software  
description  
The Texas Instruments MSP430 is an ultra-low power mixed signal microcontroller family consisting of several  
devices which features different sets of modules targeted to various applications. The controller is designed to  
be battery operated for an extended application lifetime. With the 16-bit RISC architecture, 16 integrated  
registers on the CPU, and a constant generator, the MSP430 achieves maximum code efficiency. The  
digital-controlled oscillator, together with the frequency lock loop (FLL), provides a wake up from a low-power  
mode to an active mode in less than 6 s. The MSP430x33x series micro-controllers have built in hardware  
multiplication and communication capability using asynchronous (UART) and synchronous protocols.  
Typical applications of the MSP430 family include electronic gas, water, and electric meters and other sensor  
systems that capture analog signals, converts them to digital values, processes, displays, or transmits them to  
a host system.  
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of  
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
Copyright 1999, Texas Instruments Incorporated  
PRODUCTION DATA information is current as of publication date.  
Products conform to specifications per the terms of Texas Instruments  
standard warranty. Production processing does not necessarily include  
testing of all parameters.  
1
POST OFFICE BOX 655303 DALLAS, TEXAS 75265  

MSP430P337AIPJM 替代型号

型号 品牌 替代类型 描述 数据表
MSP430P337IPJM TI

完全替代

MIXED SIGNAL MICROCONTROLLERS
MSP430P337AIPJMR TI

类似代替

MIXED SIGNAL MICROCONTROLLERS

与MSP430P337AIPJM相关器件

型号 品牌 获取价格 描述 数据表
MSP430P337AIPJMR TI

获取价格

MIXED SIGNAL MICROCONTROLLERS
MSP430P337APJM TI

获取价格

MIXED SIGNAL MICROCONTROLLERS
MSP430P337HFD TI

获取价格

MIXED SIGNAL MICROCONTROLLERS
MSP430P337IPJM TI

获取价格

MIXED SIGNAL MICROCONTROLLERS
MSP430P337PJM TI

获取价格

MIXED SIGNAL MICROCONTROLLERS
MSP430TCH5E TI

获取价格

Haptics-Enabled Mixed-Signal Microcontroller
MSP430TCH5E_14 TI

获取价格

Haptics-Enabled Mixed-Signal Microcontroller
MSP430TCH5EPW TI

获取价格

Haptics-Enabled Mixed-Signal Microcontroller
MSP430TCH5EPWR TI

获取价格

Haptics-Enabled Mixed-Signal Microcontroller
MSP430TCH5ERHB TI

获取价格

Haptics-Enabled Mixed-Signal Microcontroller