Support &
Community
Reference
Design
Product
Folder
Order
Now
Tools &
Software
Technical
Documents
MSP430FR5869, MSP430FR5868, MSP430FR5867, MSP430FR58671
MSP430FR5859, MSP430FR5858, MSP430FR5857
MSP430FR5849, MSP430FR5848, MSP430FR5847, MSP430FR58471
SLASE34E –MAY 2014–REVISED AUGUST 2018
MSP430FR586x, MSP430FR584x Mixed-Signal Microcontrollers
1 Device Overview
1.1 Features
1
– Accessible Bit-, Byte-, and Word-Wise (in Pairs)
– Edge-Selectable Wake From LPM on All Ports
– Programmable Pullup and Pulldown on All Ports
• Code Security and Encryption
• Embedded Microcontroller
– 16-Bit RISC Architecture up to 16‑MHz Clock
– Wide Supply Voltage Range From 3.6 V Down
to 1.8 V (Minimum Supply Voltage is Restricted
by SVS Levels, See the SVS Specifications)
– Random Number Seed for Random Number
Generation Algorithms
• Optimized Ultra-Low-Power Modes
– Active Mode: Approximately 100 µA/MHz
– Standby (LPM3 With VLO): 0.4 µA (Typical)
– Real-Time Clock (LPM3.5): 0.25 µA (Typical)
• Enhanced Serial Communication
– eUSCI_A0 and eUSCI_A1 Support
– UART With Automatic Baud-Rate Detection
– IrDA Encode and Decode
– SPI
(1)
– Shutdown (LPM4.5): 0.02 µA (Typical)
• Ultra-Low-Power Ferroelectric RAM (FRAM)
– Up to 64KB of Nonvolatile Memory
– Ultra-Low-Power Writes
– eUSCI_B0 Supports
– I2C With Multiple Slave Addressing
– SPI
– Fast Write at 125 ns Per Word (64KB in 4 ms)
– Unified Memory = Program + Data + Storage in
One Single Space
– Hardware UART and I2C Bootloader (BSL)
• Flexible Clock System
– 1015 Write Cycle Endurance
– Radiation Resistant and Nonmagnetic
• Intelligent Digital Peripherals
– 32-Bit Hardware Multiplier (MPY)
– 3-Channel Internal DMA
– Fixed-Frequency DCO With 10 Selectable
Factory-Trimmed Frequencies
– Low-Power Low-Frequency Internal Clock
Source (VLO)
– 32-kHz Crystals (LFXT)
– High-Frequency Crystals (HFXT)
• Development Tools and Software
– Real-Time Clock (RTC) With Calendar and
Alarm Functions
– Five 16-Bit Timers With up to Seven
Capture/Compare Registers Each
– Free Professional Development Environments
With EnergyTrace++™ Technology
– 16-Bit Cyclic Redundancy Checker (CRC)
• High-Performance Analog
– Development Kit (MSP-TS430RGZ48C)
• Family Members
– 16-Channel Analog Comparator
– Device Comparison Summarizes the Available
Device Variants and Package Types
• For Complete Module Descriptions, See the
MSP430FR58xx, MSP430FR59xx, and
MSP430FR6xx Family User's Guide
– 12-Bit Analog-to-Digital Converter (ADC)
With Internal Reference and Sample-and-Hold
and up to 16 External Input Channels
• Multifunction Input/Output Ports
– All Pins Support Capacitive Touch Capability
With No Need for External Components
(1) RTC is clocked by a 3.7-pF crystal.
1.2 Applications
•
•
•
Metering
•
•
Sensor Management
Data Logging
Energy Harvested Sensor Nodes
Wearable Electronics
1.3 Description
The MSP430™ ultra-low-power (ULP) FRAM platform combines uniquely embedded FRAM and a holistic
ultra-low-power system architecture, allowing innovators to increase performance at lowered energy
budgets. FRAM technology combines the speed, flexibility, and endurance of SRAM with the stability and
reliability of flash at much lower power.
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.