MSP430F663x
www.ti.com
SLAS566C –JUNE 2010–REVISED AUGUST 2012
MIXED SIGNAL MICROCONTROLLER
1
FEATURES
2
•
Low Supply Voltage Range: 1.8 V to 3.6 V
•
•
Four 16-Bit Timer With 3, 5, or 7
Capture/Compare Registers
•
Ultralow Power Consumption
Two Universal Serial Communication
Interfaces
–
–
Active Mode (AM):
All System Clocks Active:
270 µA/MHz at 8 MHz, 3.0 V, Flash Program
Execution (Typical)
–
–
USCI_A0 and USCI_A1 Each Support:
–
Enhanced UART Supports Auto-
Baudrate Detection
Standby Mode (LPM3):
Watchdog With Crystal, and Supply
Supervisor Operational, Full RAM
Retention, Fast Wake-Up:
–
–
IrDA Encoder and Decoder
Synchronous SPI
USCI_B0 and USCI_B1 Each Support:
1.8 µA at 2.2 V, 2.1 µA at 3.0 V (Typical)
–
–
I2CTM
–
–
Shutdown RTC Mode (LPM3.5):
Shutdown Mode, Active Real-Time Clock
With Crystal:
Synchronous SPI
•
Full-Speed Universal Serial Bus (USB)
1.1 µA at 3.0 V (Typical)
–
–
Integrated USB-PHY
Shutdown Mode (LPM4.5):
0.3 µA at 3.0 V (Typical)
Integrated 3.3-V and 1.8-V USB Power
System
•
•
Wake-Up From Standby Mode in 3 µs (Typical)
–
–
Integrated USB-PLL
16-Bit RISC Architecture, Extended Memory,
up to 20-MHz System Clock
Eight Input and Eight Output Endpoints
•
•
12-Bit Analog-to-Digital (A/D) Converter With
Internal Shared Reference, Sample-and-Hold,
and Autoscan Feature
•
Flexible Power Management System
–
Fully Integrated LDO With Programmable
Regulated Core Supply Voltage
Dual 12-Bit Digital-to-Analog (D/A) Converters
With Synchronization
–
Supply Voltage Supervision, Monitoring,
and Brownout
•
•
Voltage Comparator
•
Unified Clock System
Integrated LCD Driver With Contrast Control
for up to 160 Segments
–
–
–
FLL Control Loop for Frequency
Stabilization
•
•
Hardware Multiplier Supporting 32-Bit
Operations
Low-Power Low-Frequency Internal Clock
Source (VLO)
Serial Onboard Programming, No External
Programming Voltage Needed
Low-Frequency Trimmed Internal Reference
Source (REFO)
•
•
Six-Channel Internal DMA
–
–
32-kHz Crystals (XT1)
Real-Time Clock Module With Supply Voltage
Backup Switch
High-Frequency Crystals Up to 32 MHz
(XT2)
•
•
Family Members are Summarized in Table 1
For Complete Module Descriptions, See the
MSP430x5xx and MSP430x6xx Family User's
Guide (SLAU208)
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010–2012, Texas Instruments Incorporated