AIRCOREINDUCTORS
MS536RAT
High-Reliability AirCoreInductors
■ High Q over a wide range of frequencies
■ High temperature materials allow operation in ambient
temperatures up to 155°C.
■ Tin-lead (63/37) terminations ensure the best possible
board adhesion
Terminations Tin-lead (63/37) over copper
Ambient temperature –55°C to +125°C with Imax current, +125°C
to +155°C with derated current
Storage temperature Component: –55°C to +155°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging 800 per 13″ reel
Plastic tape: 24 mm wide, 0.3 mm thick, 12 mm pocket spacing,
6.1 mm pocket depth
Inductance2
(nH)
Percent
Q3
SRF min4
(GHz)
DCR max5
(mOhm)
Imax
Part number1
Turns
9
10
11
12
tolerance
min
(A)
MS536RAT90N_SZ
MS536RATR11_SZ
MS536RATR13_SZ
MS536RATR17_SZ
MS536RATR21_SZ
90
111
130
169
206
5,2
5,2
5,2
5,2
5,2
95
87
87
95
95
1.140
1.020
0.900
0.875
0.800
15
15
20
25
30
3.5
3.5
3.0
3.0
3.0
13
MS536RATR22_SZ
MS536RATR25_SZ
MS536RATR31_SZ
MS536RATR38_SZ
MS536RATR42_SZ
14
15
16
17
18
222
246
307
380
422
5,2
5,2
5,2
5,2
5,2
92
95
95
95
95
0.730
0.685
0.660
0.590
0.540
35
35
35
50
60
3.0
3.0
3.0
2.5
2.5
MS536RATR49_SZ
MS536RATR54_SZ
19
20
491
538
5,2
5,2
95
87
0.535
0.490
65
90
2.0
2.0
1. When ordering, specify tolerance and testing codes:
MS536RATR54GSZ
Tolerance:
Testing:
G = 2% J = 5%
Z = COTS
H = Screening per Coilcraft CP-SA-10001
N = Screening per Coilcraft CP-SA-10003
2. Inductance measured at 50 MHz on an Agilent/HP 4286A or equivalent with a Coilcraft SMD-A test fixture and correlation.
3. Q measured at 50 MHz on an Agilent/HP 4291A or equivalent with a 16193A test fixture or equivalent.
4. SRF measured on an Agilent/HP 8753ES or equivalent with a Coilcraft CCF1268 test fixture.
5. DCR measured on a Keithley 580 Micro-Ohmmeter or equivalent.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Specifications subject to change without notice.
®
Please check our website for latest information. Document MS185-1 Revised 10/24/11
Phone 800-981-0363
Fax 847-639-1508
E-mail cps@coilcraft.com
Web www.coilcraft-cps.com
1102 Silver Lake Road
Cary IL 60013
© Coilcraft, Inc. 2011