The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz
MS-156HF Series
Halogen Free
■Overview
Developed for inspection of high frequency
circuits used in portable terminals.Verification of
the circuit performance is accomplished by simply
inserting the external plug in the board mounted
receptacle.This action re-directs the circuit from
normal condition to the plug side. Removing the
plug restores circuit to its normal condition.
Space-saving design
Low profile -1.6 mm protrusion above the board.
Lightweight -0.025 g. total weight.
■Features
1. Low insertion loss
MS-156HF
0.1 dB typical at 6 GHz (not mated with the plug).
2. Space-saving design
Several types of plugs
2.7 mm x 2.7 mm occupied board space.
3. Low profile
1.6 mm protrusion above the board.
4. Lightweight
0.025 g. total weight (without vacuum cap).
5. Durability
100 mating/unmating cycles, with corresponding plug.
6. Performs over a wide frequency range
Applicable frequencies range over a wide band,
from DC to 6 GHz.
Several types of SMA conversion adapters
7. Solder wicking prevention
Nickel plating barrier on the contacts prevents solder
compound intrusion (wicking) into the contact
engagement areas.
8. Board placement with automatic equipment
Packaged on tape-and-reel. Also available with a
vacuum pick-up cap over each switch.
9. RoHS compliant
All components and materials comply with the
requirements of the EU Directive 2002/95/EC.
10. Halogen Free
Adapter for plug inspection
Chlorine, and bromine are not used in the receptacles.
*Definition according to IEC 61249-2-21.
Br 900 ppm max., Cl 900 ppm max., and Br + Cl 1500
ppm max.
■Applications
Portable terminals, ETC, notebook computers (Bluetooth),
wireless LAN, POS terminals, GPS terminals, PDA, and any
small devices requiring verification of antenna/circuit
performance.
2008.5
1