1N5985UR-1 thru 1N6031BUR-1
( or MLL5985-1 thru MLL6031B-1)
METALLURGICALLY BONDED GLASS
SURFACE MOUNT 500 mW Zener Diodes
S C O T T S D A L E D I V I S I O N
DESCRIPTION
APPEARANCE
The popular 1N5985UR-1 thru 1N6031BUR-1 (or MLL5985-1 thru MLL6031B-1)
series of 0.5 watt Zener Voltage Regulators provides selection from 2.4 to 200
volts in standard 5% or 10% tolerances as well as tighter tolerances identified by
different suffix letters on the part number. These glass-surface-mount DO-
213AA Zeners are also available in various military screening levels by adding a
prefix identifier as described in the Features section. Microsemi also offers
numerous other Zener products to meet higher and lower power applications.
DO-213AA
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
•
•
Surface mount equivalent to JEDEC registered 1N5985
•
Regulates voltage over a broad operating current
to 1N6031
and temperature range
Similar to operating current conditions of the BZV55
Pro Electron series of Zener products in Europe
Internal metallurgical bonds
Options for screening in accordance with MIL-PRF-
19500 for JAN, JANTX, JANTXV, and JANS are
available by adding MQ, MX, MV, or MSP prefixes
respectively to part numbers with “-1” suffix.
Axial-leaded equivalents available as 1N5985 to
1N6031 in the DO-35 package including “-1” suffix
options (consult factory for others)
•
•
Extensive selection from 2.4 to 200 V
Standard voltage tolerances are plus/minus 5% with
•
•
B suffix, 10 % with A suffix identification
•
Tight tolerances available in plus or minus 2% or
1% with C or D suffix respectively
Nonsensitive to ESD (MIL-STD-750 Method 1020)
Minimal capacitance (see Figure 2)
•
•
•
•
Inherently radiation hard as described in Microsemi
MicroNote 050
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
•
•
Operating and Storage temperature: -65ºC to +175ºC
•
•
•
CASE: Hermetically sealed glass DO-213AA
Thermal Resistance: 100 ºC/W junction to end cap and
250ºC/W for junction to ambient when mounted on FR4
PC board (1 oz Cu) with recommended footprint (see
last page)
(SOD80 or MLL34) MELF style package
TERMINALS: End caps tin-lead plated solderable
per MIL-STD-750, method 2026
POLARITY: Cathode indicated by band where
diode is to be operated with the banded end
positive with respect to the opposite end for Zener
regulation
•
Steady-State Power: 0.5 watts at end cap
temperatures TEC < 125oC or 0.5 watts at ambient TA <
50ºC when mounted on FR4 PC board as described for
thermal resistance (also see Figure 1)
•
•
MARKING: cathode band only
•
•
Forward voltage @200 mA: 1.1 volts
TAPE & REEL option: Standard per EIA-481-B
with 12 mm tape, 2000 per 7 inch reel or 5000 per
13 inch reel (add “TR” suffix to part number)
WEIGHT: 0.04 grams
Solder Temperatures: 260 ºC for 10 s (max)
•
•
See package dimensions on last page
Copyright 2003
Microsemi
Page 1
11-05-2003 REV 0
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503