1N6356 thru 1N6372, e3
or MPT-5 thru MPT-45C, e3
1500 W LOW CLAMPING FACTOR
TRANSIENT VOLTAGE SUPPRESSOR
S C O T T S D A L E D I V I S I O N
DESCRIPTION
APPEARANCE
This Transient Voltage Suppressor (TVS) series for 1N6356 thru 1N6372 are
JEDEC registered selections for both unidirectional and bidirectional devices.
The 1N6356 thru 1N6364 are unidirectional and the 1N6365 thru 1N6372 are
bi-directional where they all provide a very low specified clamping factor for
minimal clamping voltages (VC) above their respective breakdown voltages
(VBR) as specified herein. They are most often used in protecting sensitive
components from inductive switching transients or induced secondary
lightning effects as found in lower surge levels of IEC61000-4-5 . They are
also very successful in protecting airborne avionics and electrical systems.
Since their response time is virtually instantaneous, they can also protect
DO-13
(DO-202AA)
from ESD and EFT per IEC61000-4-2 and IEC61000-4-4.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
•
Unidirectional and bidirectional TVS series for thru-hole
mounting
• Designed to protect Bipolar and MOS Microprocessor
based systems.
•
•
Suppresses transients up to 1500 watts @ 10/1000 µs
• Protection from switching transients and induced RF
• ESD and EFT protection per IEC 61000-4-2 and -4-4
t
clamping (0 volts to V(BR) min):
Unidirectional – Less than 100 pico seconds.
Bidirectional – Less than 5 nano seconds.
• Secondary lightning protection per IEC61000-4-5 with
42 Ohms source impedance:
•
•
Working voltage (VWM) range 5 V to 45 V
Class 1, 2 & 3 1N6356 to 1N6372
Class 4: 1N6356 to 1N6362
Low clamping factor (ratio of actual VC/VBR): 1.33 @
full rated power and 1.20 @ 50% rated power
• Secondary lightning protection per IEC61000-4-5 with
•
•
Hermetic sealed DO-13 metal package
12 Ohms source impedance:
Options for screening in accordance with MIL-PRF-19500
for JAN, JANTX, JANTXV, and JANS are also available
by adding MQ, MX, MV, SP prefixes respectively to part
numbers, e.g. MX1N6356, etc.
Class 1 & 2: 1N6356 to 1N6372
Class 3: 1N6356 to 1N6362
Class 4: 1N6356 to 1N6358
• Secondary lightning protection per IEC61000-4-5 with
•
•
RoHS Compliant devices available by adding “e3” suffix
2 Ohms source impedance:
Surface mount equivalent packages also available as
SMCJ6356 – SMCJ6372 (consult factory for other
surface mount options)
Class 2: 1N6356 to 1N6361
Class 3: 1N6356 to 1N6358
• Inherently radiation hard per Microsemi MicroNote
•
Plastic axial-leaded equivalents available in the
1N6373 – 1N6389 series (see separate data sheet)
050
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
•
1500 Watts for 10/1000 μs with repetition rate of 0.01% or
•
CASE: DO-13 (DO-202AA), welded, hermetically
sealed metal and glass
less* at lead temperature (TL) 25oC (See Figs. 1, 2, & 4)
•
•
Operating & Storage Temperatures: -65o to +175oC
•
•
FINISH: All external metal surfaces are Tin-Lead or
RoHS Compliant annealed matte-Tin plating
solderable per MIL-STD-750 method 2026
THERMAL RESISTANCE: 50oC/W junction to lead at
0.375 inches (10 mm) from body or 110 oC/W junction to
ambient when mounted on FR4 PC board with 4 mm2
copper pads (1 oz) and track width 1 mm, length 25 mm
POLARITY: Cathode connected to case and
polarity indicated by diode symbol
DC Power Dissipation*: 1 Watt at TL < +125oC 3/8” or 10
mm from body (also see Figure 5)
•
•
•
MARKING: Part number and polarity diode symbol
WEIGHT: 1.4 grams. (Approx)
•
•
•
Forward surge current: 200 Amps for 8.3ms half-sine
TAPE & REEL option: Standard per EIA-296 (add
“TR” suffix to part number)
wave at TA = +25oC for unidirectional only (1N6356-6364)
Solder Temperatures: 260 o C for 10 s (maximum)
•
See package dimension on last page
* TVS devices are not typically used for dc power dissipation and are instead operated at or less than their rated standoff voltage
(VWM) except for transients that briefly drive the device into avalanche breakdown (VBR to VC region).
Copyright © 2007
Microsemi
Page 1
10-03-2007 REV C
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
5秒后页面跳转
解析光耦仿真器：升级光耦合器技术的必要性
英伟达新一代Blackwell GPU过热问题致交付延迟
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
