Freescale Semiconductor, Inc.
Advance Information
MPC8241TXXPNS
Rev. 1, 8/2003
MPC8241 Part Number
Specification for the
XPC8241TXXnnnx Series
Motorola Part
Numbers Affected:
This document describes part-number-specific changes to recommended operating conditions
and revised electrical specifications, as applicable, from those described in the general
MPC8241 Integrated Processor Hardware Specifications (Order No. MPC8241EC/D). The
MPC8241 combines a MPC603e PowerPC™ core microprocessor with a PCI bridge.
XPC8241TZP166B
MPC8241TZQ166D
XPC8241TZP200B
MPC8241TZQ266D
Specifications provided in this document supersede those in the MPC8241 Integrated
Processor Hardware Specifications, Rev. 0.3 or later, for the part numbers listed in Table A
only. Specifications not addressed herein are unchanged. Because this document is frequently
updated, refer to http://www.motorola.com/semiconductors or to your Motorola sales office
for the latest version.
Note that headings and table numbers in this document are not consecutively numbered. They
are intended to correspond to the heading or table affected in the general hardware
specification.
Part numbers addressed in this document are listed in Table A. For more detailed ordering
information see Section 1.9, “Ordering Information.”
Table A. Part Numbers Addressed by this Data Sheet
Operating Conditions
Significant
Differences from
Hardware
Processor
Version
Register
Value
Motorola
CPU
Frequency
(MHz)
Part Number 1
VDD
TJ (°C)
Specification
XPC8241TZP166B
MPC8241TZQ166D
166
200
266
1.8 ± 100 mV –40 to 105 Extended temperature 0x80811014
range for additional part
offering
XPC8241TZP200B
MPC8241TZQ166D
MPC8241TZQ266D
Note: The X prefix in a Motorola part number designates a “Pilot Production Prototype” as defined by
Motorola SOP 3-13. These are from a limited production volume of prototypes manufactured, tested,
and Q.A. inspected on a qualified technology to simulate normal production. These parts have only
preliminary reliability and characterization data. Before pilot production prototypes may be shipped,
written authorization from the customer must be on file in the applicable sales office acknowledging the
qualification status and the fact that product changes may still occur while shipping pilot production
prototypes.
1
ZP = PGBA, ZQ = thick substrate and thick mold cap PBGA.
For More Information On This Product,
Go to: www.freescale.com