Document order number: MPC17531A
Rev 2.0, 09/2005
Freescale Semiconductor
Technical Data
700 mA Dual H-Bridge Motor
Driver with 3.0 V Compatible
Logic I/O
17531A
The 17531A is a monolithic dual H-Bridge power IC ideal for
portable electronic applications containing bipolar step motors and/or
brush DC-motors (e.g., cameras and disk drive head positioners).
DUAL H-BRIDGE
The 17531A operates from 2.0 V to 8.6 V using the internal charge
pump, with independent control of each H-Bridge via parallel MCU
interface. The device features built-in shoot-through current
protection and an undervoltage shutdown function.
The 17531A has four operating modes: Forward, Reverse, Brake,
and Tri-Stated (High Impedance). The 17531A has a low total
RDS(ON) of 1.2 Ω (max @ 25°C).
The 17531A efficiently drives many types of micromotors with low
power dissipation owing to its low output resistance and high output
slew rates. The H-Bridge outputs can be independently pulse width
modulated (PWM’ed) at up to 200 kHz for speed/torque and current
control.
VMFP SUFFIX
EV SUFFIX (PB-FREE)
98ASA10616D
QFN SUFFIX
EP SUFFIX (PB-FREE)
98ARL10577D
20-TERMINAL VMFP
24-TERMINAL QFN
Features
ORDERING INFORMATION
• Low Total RDS(ON) 0.8 W (Typ), 1.2 Ω (Max) @ 25°C
• Output Current 0.7 A (DC)
• Shoot-Through Current Protection Circuit
• PWM Control Input Frequency up to 200 kHz
• Built-In Charge Pump Circuit
Temperature
Device
Package
Range (T )
A
MPC17531AEV/EL
MPC17531AEP/R2
20 VMFP
24 QFN
-20°C to 65°C
• Low Power Consumption
• Undervoltage Detection and Shutdown Circuit
• Power Save Mode with Current Draw ≤ 2.0 µA
• Pb-Free Packaging Designated by Suffix Codes EV and EP
3.0 V
5.0 V
17531A
VDD
C1L
C1H
C2L
C2H
VM
OUT1A
CRES OUT1B
Bipolar
Step
Motor
IN1A OUT2A
N
IN1B
S
OUT2B
MCU
IN2A
IN2B
PSAVE
GND
Figure 1. 17531A Simplified Application Diagram
* This document contains certain information on a new product.
Specifications and information herein are subject to change without notice.
© Freescale Semiconductor, Inc., 2005. All rights reserved.