MP6543C
22V, 1.2A Three-Phase BLDC Motor Driver
with Three Integrated Half-Bridges
DESCRIPTION
FEATURES
The MP6543C is a three-phase brushless DC
(BLDC) motor driver with three integrated half-
bridges, consisting of six N-channel power
MOSFETs, as well as six pre-drivers, two gate
driver power supplies, and three current-sense
amplifiers. Each half-bridge includes an enable
(EN) input and pulse-width modulation (PWM)
input. The MP6543C can achieve up to 1.2A of
continuous output current (IOUT) across a 3V to
22V input voltage (VIN) range.
•
3V to 22V Operating Input Voltage (VIN)
Range
Three Integrated Half-Bridge Drivers
•
•
•
•
1.2A Continuous Output Current (IOUT
110mΩ RDS(ON) per MOSFET
Enable (EN) Input and Pulse-Width
Modulation (PWM) Input
)
•
3.3V, 100mA Built-In Low-Dropout (LDO)
Regulator
Internal Charge Pump for 100% Duty Cycle
Automatic Synchronous Rectification
Integrated Bidirectional Current-Sense
Amplifiers
Configurable Over-Current Protection
(OCP)
Under-Voltage Lockout (UVLO) Protection
•
•
•
The internal current-sense circuit does not
require a low-ohmic shunt resistor. Each half-
bridge has an independent ground pin (LSSA,
LSSB, and LSSC) that allows current to be
measured via an external shunt resistor. This
allows the MP6543C to be used for different
application requirements.
•
•
•
•
Thermal Shutdown
Available in a QFN-24 (3mmx4mm)
Package
An internal charge pump generates the gate
driver supply voltage for the high-side MOSFETs
(HS-FETs). A trickle-charge circuit maintains a
sufficient gate driver voltage for 100% duty cycle
operation.
APPLICATIONS
•
Three-Phase Brushless DC (BLDC) Motor
Drivers
Full protection features include configurable
over-current protection (OCP), under-voltage
lockout protection (UVLO), and thermal
shutdown.
All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive.
For MPS green status, please visit the MPS website under Quality
Assurance. “MPS”, the MPS logo, and “Simple, Easy Solutions” are
trademarks of Monolithic Power Systems, Inc. or its subsidiaries.
The MP6543C is available in a QFN-24
(3mmx4mm) package with an exposed thermal
pad.
MP6543C Rev. 1.0
8/18/2021
MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2021 MPS. All Rights Reserved.
1