MP6543H
22V, 2A, Three-Phase Power Stage
DESCRIPTION
FEATURES
The MP6543H family of products (MP6543H,
MP6543H-A, and MP6543H-B) are three-phase
brushless DC motor drivers. They integrate three
half-bridges, consisting of six N-channel power
MOSFETs, as well as pre-drivers, gate drive
power supplies, and current-sense amplifiers.
3V to 22V Operating Supply Voltage
Three Integrated Half-Bridge Drivers
2A Continuous Output Current
MOSFET On Resistance: 110mΩ per FET
MP6543H: EN and PWM Inputs
MP6543H-A: LS and HS Inputs
MP6543H-B: Hall-Effect Sensor Inputs
Built-In 3.3V, 100mA LDO Regulator
Internal Charge Pump Supports 100% Duty
Cycle Operation
Automatic Synchronous Rectification
Under-Voltage Lockout (UVLO) and
Thermal Shutdown Protection
Over-Current Protection (OCP) with
Adjustable Threshold
The MP6543H has enable (EN) and PWM inputs
for each half-bridge. The MP6543H-A has
separate high-side (HS) and low-side (LS) inputs,
while the MP6543H-B has Hall-effect sensor
inputs. Otherwise, these three devices are
similar. References to the MP6543H in this
document apply to the MP6543H-A and
MP6543H-B, unless otherwise noted.
The MP6543H delivers up to 2A of continuous
current (depending on thermal and PCB
conditions) with an adjustable over-current
protection (OCP) threshold. It uses an internal
charge pump to generate the gate drive supply
voltage for the high-side MOSFETs, and a trickle
charge circuit to maintain a sufficient gate drive
voltage to operate at 100% duty cycle.
Integrated, Bidirectional Current-Sense
Amplifiers
Available in a QFN-24 (3mmx4mm)
Package
APPLICATIONS
3-Phase Brushless DC Motor Drivers
All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive.
For MPS green status, please visit the MPS website under Quality
Assurance. “MPS”, the MPS logo, and “Simple, Easy Solutions” are
trademarks of Monolithic Power Systems, Inc. or its subsidiaries.
Internal safety features include thermal
shutdown, under-voltage lockout (UVLO), and
over-current protection (OCP).
The MP6543H is available in a QFN-24
(3mmx4mm) package with an exposed thermal
pad.
TYPICAL APPLICATION
VIN
VCP
nSLEEP
VIN
ENA/LSA/HA
ENB/LSB/HB
ENC/LSC/HC
VIN_LDO
VIN_LDO
PWMA/HSA/DIR
V3P3
SA
3.3V Out
PWMB/HSB/PWM
PWMC/HSC/nBRAKE
Exposed
GND
PAD
nFAULT
SOA
MP6543H
MP6543H-A
MP6543H-B
SB
SC
SOB
SOC
OC_ADJ
LSS
GND
VREF
MP6543H Rev. 1.0
12/8/2020
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2020 MPS. All Rights Reserved.
1