MP2926
Triple-Loop, Digital, Multi-Phase
Controller with PMBus Interface
DESCRIPTION
FEATURES
The MP2926 is a triple-loop, digital, multi-phase
controller that provides power for the memory
and SoC. The MP2926 can work with MPS’s
Intelli-PhaseTM products to complete the multi-
phase voltage regulator (VR) solution with
minimal external components. The MP2926 can
be configured with up to 2-phase operation for
each rail.
Multi-Phase, Triple-Output, Digital Controller
PMBus/I2C Compliant (1MHz Bus Speed)
PVID Mode Available
Pin Configurable for PMBus Address
Built-In NVM to Store Custom
Configurations
Switching Frequency Range 200kHz to
3MHz
Automatic Loop Compensation
Fewer External Components than a
Conventional Analog Controller
Best Transient Performance with Nonlinear
Digital Control
Flexible Phase Assignment for Triple Rails
Automatic Phase-Shedding to Improve
Overall Efficiency
The MP2926 provides an on-chip non-volatile
memory (NVM) to store and restore device
configurations. Device configurations and fault
parameters can be easily programmed or
monitored via the PMBus/I2C interface. The
device can monitor and report output current
through the current-sense (CS) output from
Intelli-PhaseTM devices.
Phase-to-Phase Active Current Balancing
with Configurable Offsets for Thermal
Balance
Input and Output Voltage, Current, and
Power Monitoring
Regulator Temperature Monitoring
VIN UVLO, Output OVP/UVP, OCP, OTP
with No Action, Latch, or Hiccup Mode
Intelli-PhaseTM Fault Diagnosis
Auto-Records the VR Fault Type to the
NVM
The MP2926 is based on unique, digital, multi-
phase, nonlinear control to provide a fast
transient response to the load transient with
minimal output capacitors. With only one power
loop control method for both steady state and
load transient, the power loop compensation is
easy to configure.
The device is available in
(5mmx5mm) package.
a
QFN-40
Digital Load-Line Regulation
Overclocking Mode by Adding Offset to
Output Voltage
RoHS-Compliant
Available in a QFN-40 (5mmx5mm)
Package
APPLICATIONS
SoC Power
DDR Memory Power
Telecom and Networking Systems
Base Stations
All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive.
For MPS green status, please visit the MPS website under Quality
Assurance. “MPS”, the MPS logo, and “Simple, Easy Solutions” are
trademarks of Monolithic Power Systems, Inc. or its subsidiaries.
MP2926 Rev. 1.0
7/28/2020
MonolithicPower.com
1
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2020 MPS. All Rights Reserved.