MP2130
High Efficiency, 3.5A, 6V, 1.2MHz
Synchronous Step-Down Converter in an
Ultra–Small QFN12 (2x2mm) Package
The Future of Analog IC Technology
DESCRIPTION
FEATURES
The MP2130 is a monolithic step-down switch
mode converter with built-in internal power
MOSFETs. It achieves 3.5A continuous output
current from a 2.7V to 6V input voltage with
excellent load and line regulation. The MP2130 is
ideal for powering portable equipment that runs
from a single cell Lithium-Ion (Li+) Battery. The
output voltage can be regulated as low as 0.6V.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Above 95% Peak Efficiency
Above 80% Light Load Efficiency.
Wide 2.7V to 6V Operating Input Range
Output Voltage as Low as 0.6V
100% Duty Cycle in Dropout
3.5A Output Current
50mΩ and 40mΩ Internal Power MOSFET
1.2MHz Frequency
EN and Power Good for Power Sequencing
Cycle-by-Cycle Over Current Protection
Auto Discharge at Power-off
Short Circuit Protection with Hiccup Mode
Thermal Shutdown
Stable with Low ESR Output Ceramic
Capacitors
Available in a QFN12 (2x2mm) Package
The Constant-On-time (COT) control scheme
provides fast transient response high light-load
efficiency and easy loop stabilization.
Fault condition protection includes cycle-by-cycle
current limit and thermal shutdown.
The MP2130 requires a minimum number of readily
available standard external components and is
available in an ultra-small QFN12 (2x2mm)
package.
•
APPLICATIONS
The MP2130 is ideal for a wide range of
applications including PDAs, portable instruments,
DVD drives, small handhold and battery–powered
devices.
•
•
•
•
Storage Drives
Portable/Handheld Devices
Wireless/Networking Cards
Low Voltage I/O System Power
All MPS parts are lead-free and adhere to the RoHS directive. For MPS green
status, please visit MPS website under Quality Assurance. “MPS” and “The
Future of Analog IC Technology” are Trademarks of Monolithic Power Systems,
Inc.
TYPICAL APPLICATION
Efficiency
V
=5V
IN
L
1
100
95
90
85
80
75
70
VOUT
1.2V
VIN
5V
1
2,11
6
V =3.3V
O
SW
PVIN
VIN
10
C1
22
C2
10
OUT
V =2.4V
O
MP2130
R1
200k
8
9
EN
PG
EN
PG
7
5
FB
V =1.8V
O
R2
200k
NC
V =1.2V
O
AGND PGND
4
3,12
0.01
0.1
1
10
LOAD CURRENT (A)
MP2130 Rev. 1.23
11/22/2013
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2013 MPS. All Rights Reserved.
1