MP2009
Ultra-Low-Noise
Low-Dropout, 120mA Linear Regulator
The Future of Analog IC Technology
DESCRIPTION
FEATURES
The MP2009 is an ultra low noise, low dropout
linear regulator. The output voltage of MP2009
ranges from 1.5V to 4.5V in 100mV increments
and 1% accuracy by operating from a +2.0V to
+6.0V input. It is designed to deliver up to
120mA continuous output current. It achieves a
low 120mV dropout for full load current.
•
•
Space-Saving SC70 Package
16µVRMS Output Noise (100Hz to 30kHz) No
Bypass Capacitor Required
•
•
•
78dB PSRR at 1kHz
120mV Dropout at 120mA Load
Stable with 1µF Ceramic Capacitor for Any
Load
•
•
Low 50µA Ground Current
The MP2009 uses an internal PMOS as the
pass element, which consumes 50µA supply
current at no load condition. New innovative
design techniques make MP2009 achieve ultra-
low output voltage noise of 16µVRMS without a
noise bypass capacitor.
Very Fast Line and Load Transient
Response with Small Input and Output
Capacitor
•
Current Limit and Thermal Protection
APPLICATIONS
The MP2009 are designed and optimized to
work with low value, low cost ceramic
capacitors in space-limiting and performance
consideration. It requires only 1µF (typ) of
output capacitance for stability with any load.
It is available in a 5-pin SC70 package.
•
•
•
•
•
•
•
•
Cellular and Cordless Phones
VCOs
PDA and Palmtop Computers
Digital Cameras
Base Stations
Wireless LANs
Bluetooth Portable Radios and Accessories
Portable and Battery-Powered Equipment
All MPS parts are lead-free and adhere to the RoHS directive. For MPS green
status, please visit MPS website under Products, Quality Assurance page.
“MPS” and “The Future of Analog IC Technology” are registered trademarks of
Monolithic Power Systems, Inc.
TYPICAL APPLICATION
INPUT
OUTPUT PRESET
1.5V to 4.5V
2V to 6V
VIN
OUT
CIN
1uF
MP2009
ON
EN
COUT
1uF
OFF
GND
MP2009 Rev. 1.2
12/18/2013
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2013 MPS. All Rights Reserved.
1