Order this document
by MOC3081/D
SEMICONDUCTOR TECHNICAL DATA
GlobalOptoisolator
[IFT = 15 mA Max]
[IFT = 10 mA Max]
[IFT = 5 mA Max]
(800 Volts Peak)
*Motorola Preferred Device
The MOC3081, MOC3082 and MOC3083 devices consist of gallium arsenide
infrared emitting diodes optically coupled to monolithic silicon detectors
performing the function of Zero Voltage Crossing bilateral triac drivers.
They are designed for use with a triac in the interface of logic systems to
equipment powered from 240 Vac lines, such as solid–state relays, industrial
controls, motors, solenoids and consumer appliances, etc.
STYLE 6 PLASTIC
•
•
•
•
Simplifies Logic Control of 240 Vac Power
Zero Voltage Crossing
6
1
dv/dt of 1500 V/µs Typical, 600 V/µs Guaranteed
STANDARD THRU HOLE
CASE 730A–04
To order devices that are tested and marked per VDE 0884 requirements, the
suffix ”V” must be included at end of part number. VDE 0884 is a test option.
Recommended for 240 Vac(rms) Applications:
•
•
•
•
Solenoid/Valve Controls
Lighting Controls
• Temperature Controls
• E.M. Contactors
COUPLER SCHEMATIC
Static Power Switches
AC Motor Drives
• AC Motor Starters
• Solid State Relays
1
2
3
6
5
4
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
ZERO
CROSSING
CIRCUIT
INPUT LED
Reverse Voltage
V
6
Volts
mA
R
1. ANODE
2. CATHODE
3. NC
4. MAIN TERMINAL
5. SUBSTRATE
Forward Current — Continuous
I
F
60
Total Power Dissipation @ T = 25°C
Negligible Power in Output Driver
Derate above 25°C
P
D
120
mW
A
1.41
mW/°C
DO NOT CONNECT
6. MAIN TERMINAL
OUTPUT DRIVER
Off–State Output Terminal Voltage
V
800
1
Volts
A
DRM
Peak Repetitive Surge Current
(PW = 100 µs, 120 pps)
I
TSM
Total Power Dissipation @ T = 25°C
Derate above 25°C
P
D
150
1.76
mW
mW/°C
A
TOTAL DEVICE
(1)
Isolation Surge Voltage
(Peak ac Voltage, 60 Hz, 1 Second Duration)
V
ISO
7500
Vac(pk)
Total Power Dissipation @ T = 25°C
Derate above 25°C
P
D
250
2.94
mW
mW/°C
A
Junction Temperature Range
Ambient Operating Temperature Range
T
–40 to +100
–40 to +85
–40 to +150
260
°C
°C
°C
°C
J
(2)
T
A
(2)
Storage Temperature Range
T
stg
Soldering Temperature (10 s)
T
L
1. Isolation surge voltage, V
, is an internal device dielectric breakdown rating.
ISO
1. For this test, Pins 1 and 2 are common, and Pins 4, 5 and 6 are common.
2. Refer to Quality and Reliability Section in Opto Data Book for information on test conditions.
Preferred devices are Motorola recommended choices for future use and best overall value.
GlobalOptoisolator is a trademark of Motorola, Inc.
REV 1
Motorola Optoelectronics Device Data
1
Motorola, Inc. 1995