是否Rohs认证: | 不符合 | 生命周期: | Obsolete |
包装说明: | SOP, SOP16,.25 | Reach Compliance Code: | unknown |
HTS代码: | 8542.39.00.01 | 风险等级: | 5.29 |
其他特性: | JOHNSON COUNTER WITH 10 DECODED OUTPUTS; TCO OUTPUT; GATED CLOCK | 计数方向: | UP |
系列: | HC/UH | JESD-30 代码: | R-PDSO-G16 |
JESD-609代码: | e0 | 长度: | 9.9 mm |
负载电容(CL): | 50 pF | 负载/预设输入: | NO |
逻辑集成电路类型: | RING COUNTER | 工作模式: | SYNCHRONOUS |
位数: | 10 | 功能数量: | 1 |
端子数量: | 16 | 最高工作温度: | 85 °C |
最低工作温度: | -40 °C | 封装主体材料: | PLASTIC/EPOXY |
封装代码: | SOP | 封装等效代码: | SOP16,.25 |
封装形状: | RECTANGULAR | 封装形式: | SMALL OUTLINE |
峰值回流温度(摄氏度): | NOT SPECIFIED | 电源: | 2/6 V |
传播延迟(tpd): | 58 ns | 认证状态: | Not Qualified |
座面最大高度: | 1.75 mm | 子类别: | Counters |
最大供电电压 (Vsup): | 6 V | 最小供电电压 (Vsup): | 2 V |
标称供电电压 (Vsup): | 5 V | 表面贴装: | YES |
技术: | CMOS | 温度等级: | INDUSTRIAL |
端子面层: | Tin/Lead (Sn/Pb) | 端子形式: | GULL WING |
端子节距: | 1.27 mm | 端子位置: | DUAL |
处于峰值回流温度下的最长时间: | NOT SPECIFIED | 触发器类型: | POSITIVE EDGE |
宽度: | 3.9 mm | 最小 fmax: | 24 MHz |
Base Number Matches: | 1 |
型号 | 品牌 | 获取价格 | 描述 | 数据表 |
MM74HC4017M/A+ | NSC |
获取价格 |
IC,COUNTER,UP,DECADE,HC-CMOS,SOP,16PIN,PLASTIC | |
MM74HC4017MX | TI |
获取价格 |
HC/UH SERIES, SYN POSITIVE EDGE TRIGGERED 10-BIT UP RING COUNTER, PDSO16, PLASTIC, SO-16 | |
MM74HC4017N | TI |
获取价格 |
HC/UH SERIES, SYN POSITIVE EDGE TRIGGERED 10-BIT UP RING COUNTER, PDIP16, DIP-16 | |
MM74HC4017N | ROCHESTER |
获取价格 |
Ring Counter, HC/UH Series, Synchronous, Positive Edge Triggered, 10-Bit, Up Direction, CM | |
MM74HC4017N | NSC |
获取价格 |
IC HC/UH SERIES, SYN POSITIVE EDGE TRIGGERED 10-BIT UP RING COUNTER, PDIP16, DIP-16, Count | |
MM74HC4017N/A+ | NSC |
获取价格 |
IC,COUNTER,UP,DECADE,HC-CMOS,DIP,16PIN,PLASTIC | |
MM74HC4017N/B+ | NSC |
获取价格 |
IC,COUNTER,UP,DECADE,HC-CMOS,DIP,16PIN,PLASTIC | |
MM74HC4020 | FAIRCHILD |
获取价格 |
14-Stage Binary Counter 12-Stage Binary Counter | |
MM74HC4020J | NSC |
获取价格 |
IC HC/UH SERIES, ASYN NEGATIVE EDGE TRIGGERED 14-BIT UP BINARY COUNTER, CDIP16, DIP-16, Co | |
MM74HC4020M | FAIRCHILD |
获取价格 |
14-Stage Binary Counter 12-Stage Binary Counter |