Type MLPS/MLPSR 105 °C FlatpackTM, Ultra Long Life, Aluminum Electrolytic
Type MLPS Flatpack aluminum electrolytic capacitors offer high
Very Low Profile
capacitance density in a low-profile package at 105 ºC. Their welded
seals and rugged construction provide extraordinary long-life and
reliability needed for ruggedized, commercial, and military-grade power
supplies. MLPS Flatpacks have been fully tested to 10,000 hours at
rated voltage and ripple current at 105 °C.
Highlights
• Military-grade flat electrolytics, now optimized for 105 °C applications
• Life tested to 10,000 hours @ 105 °C, Rated Vdc
• High Vibration resistance up to 20g (HV Option)
• High Reliability burn-in available (48 hrs @ Vr, 105 °C)
• Welded seal resists “dry-out,” typical of conventional electrolytics.
• Excellent capacitance retention at -55 °C
Specifications
Temperature Range
-55 ºC to 105 ºC
-65 ºC to 105 ºC
Nonoperating Temperature Range
Rated Voltage Range
7.5 Vdc to 450 Vdc
120 µF to 51,000 µF
Capacitance Range
±20%
Capacitance Tolerance
5 minutes after Rated Voltage is achieved ≤0.002*C*V (µA)
Leakage Current
Frequency only Multipliers
Ambient Temperature & Frequency Multipliers
Hz
50
60
120
1.00
1.00
1.00
1.00
1.00
360
1.02
1.06
1.10
1.10
1.07
1000 20000
0-50
0.83
0.79
0.75
0.70
0.71
0.82
0.81
0.78
0.72
0.73
1.05
1.14
1.28
1.32
1.22
1.06
1.15
1.34
1.39
1.29
51-100
101-200
201-300
301-450
Ambient Temperature Only Multipliers (No Heat Sink)
Temp°C
0-50
45
55
65
75
85
95
105
1.00
1.00
1.00
1.00
4.00
4.10
4.30
4.00
4.00
4.10
4.30
4.00
3.95
4.05
4.20
3.95
3.50
3.60
3.70
3.50
3.00
3.00
3.10
3.00
2.25
2.25
2.30
2.25
51-100
101-200
201-300
Ambient Air Temperature Velocity Only Multipliers (No heat sink)
Air Velocity m/sec
0.25
1.00
1.00
1.00
1.18
1.16
2.50
1.37
1.35
5.00
1.51
1.50
Ripple Current Multiplier (Bare Case)
Ripple Current Multiplier (PE Sleeved)
The air flow multipliers are without a heatsink and use the multipliers
at the indicated temperature. The user must also ensure the
maximum peak voltage including ripple voltage that may be applied
continuously between the terminals should be less than the rated
voltage of the capacitor to achieve the longest life.
Air Cooled
The typical ripple current capability is set by the maximum permissible
internal core temperature, maximum lead current capability of
20 Arms, and a maximum 20 ºC core rise (Not heatsinked), the
maximum peak voltage including ripple voltage applied continuously
between the terminals is less than the rated voltage of the capacitor.
In addition, the user should ensure that the peak-to-peak capacitor
voltage divided by the capacitor’s rated voltage VR should not exceed
the greater of 10% or 0.01352 × (VDC Rated / 1[VDC])1/2.
Typical Ripple Current Capability
MLPS: Copper wire with 60/40 tin/lead electroplate, 20 amps max
MLPSR: Copper wire with brite tin electroplate, 20 amps max
Terminals- Lead Free Version Available
Aluminum with stainless steel sleeve
Case Material
CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800