TEMPERATURE SENSITIVE METAL FILM RESISTORS
TC’S FROM +150 TO +7000 PPM
RESISTORSꢀCAPACITORSꢀCOILSꢀDELAY LINES
MLP SERIES +155°C MELF
LP SERIES +155°C AXIAL
LPT SERIES +300°C AXIAL
Linear positive temperature coefficients:
Term.W is
RoHS
compliant
& 260°C
compatible
LP & MLP temperature sensitive resistors feature linear positive
T.C.’s in a wide range of R/T slopes. The series was developed as
a low cost substitute for wirewound sensors. Various temperature
coefficients are obtained by adjusting the film composition. LPT
features platinum film for improved linearity, interchangeability and
+300°C operating temp. Small sizes result in fast response
times, typically 6 seconds for LP/MLP12 & LPT, 9 seconds for
LP/MLP25 (in still air).
FEATURES
RoHS
ꢀ Economically priced PTC sensors
ꢀ Wide resistance range: 1.5Ω - 100K
ꢀ High stability, excellent linearity
ꢀ Standard tolerance: ±5% (1%1, 2%, 10% available)
ꢀ Marked with color bands or alpha-numeric
ꢀ Resistance value is measured at 25°C (0°C available)
ꢀ Flat chip available, refer to FLP series
H
L
D
d
Inch [mm]
STANDARD TEMPERATURE COEFFICIENTS
(Boldfaced items indicate most popular TC’s)
TYPE
LP12
LP25
LPT
L ±.031 [.8] D ± .02 [.5] d ± .003 [.08]
H Min.
1.00 [25.4]
1.18 [30]
.140 [3.56]
.270 [6.86]
.157 [4]
.064 [1.6]
.090 [2.3]
.064 [1.6]
.020 [.5]
.024 [.6]
.018 [.46]
Standard Resistance Range
TCR*
(ppm/°C) Tolerance
TCR*
1.00 [25.4]
LP12 & MLP12 LP25 & MLP25
150
±50 ppm/°C
51Ω - 51KΩ
100Ω - 100KΩ
D
L
250
350
51Ω - 51KΩ
51Ω - 51KΩ
51Ω - 51KΩ
51Ω - 51KΩ
51Ω - 43KΩ
51Ω - 43KΩ
51Ω - 43KΩ
51Ω - 43KΩ
51Ω - 27KΩ
51Ω - 27KΩ
51Ω - 27KΩ
51Ω - 10KΩ
51Ω - 10KΩ
51Ω - 9.1KΩ
100Ω - 100KΩ
100Ω - 100KΩ
100Ω - 100KΩ
100Ω - 100KΩ
100Ω - 82KΩ
100Ω - 82KΩ
100Ω - 82KΩ
100Ω - 82KΩ
100Ω - 51KΩ
100Ω - 51KΩ
100Ω - 51KΩ
100Ω - 27KΩ
100Ω - 27KΩ
100Ω - 22KΩ
Inch [mm]
W
t
450
TYPE
MLP12
MLP25
L±.01 [.25]
.135 [3.4]
.225 [5.7]
D±.008 [.2]
.057 [1.45]
.085 [2.15]
W (Min.)
.012 [.3]
.020 [.5]
t (Max.)
.006 [.15]
.008 [.2]
550
650
±10%
750
PERFORMANCE
850
LP12 & MLP12 LP25 & MLP25
LPT
950
+150~
+150~
TC (25 - 65°C)
+3500ppm/°C
+5000ppm/°C
+5000ppm/°C
1000
1200
1400
1600
1800
2000
Resis. Range
Wattage @25°C
Voltage Rating
10 ohm to 51K 1.5 ohm to 100K 10 to 500 ohm
1/8W
150V
1/4W
250V
1/16W
150V
Operating Temp. -55°C to +155°C -55°C to +155°C -55°C to +300°C
Derating >25°C .77%/°C (W&V) .77%/°C (W&V) .364%/°C (W&V)
Thermal Diss.
1000-hr Load Life
1 Year Shelf Life
High Temp.
2.5 mW/°C
1.0% Max.
0.3% Max.
±1% after
4.5mW/°C
1.0% Max.
0.3% Max.
±1% after
2mW/°C
0.5% Max.
0.2% Max.
±0.5% after
2200
2500
3000
51Ω - 9.1KΩ
51Ω - 9.1KΩ
10Ω - 5.1KΩ
100Ω - 22KΩ
100Ω - 22KΩ
20Ω - 10KΩ
Exposure
1000hrs@125°C 1000hrs@125°C 1000hrs@150°C
±5%
±0.2% 0~100°C
±0.5% 0~100°C ±0.5% 0~100°C
±1.5% -50~150°C ±1.5% -50~150°C
Linearity
±0.5% -50~150°C
±1.5% -50~300°C
3300
3600
10Ω - 5.1KΩ
10Ω - 5.1KΩ
20Ω - 10KΩ
1.5Ω - 10KΩ
P/N DESIGNATION:
RCD Type(LP12, MLP12, LP25, MLP25,LPT)
Resis.@25°C2: If ≥2% tol. use 2 signif.figures &multiplier,
(1R0=1Ω, 100=10Ω, 101=100Ω, 102=1K, 103=10K, etc.);
If ≤1% tol. use 3 signif. digits & multiplier (1R00=1Ω,
10R0=10Ω, 1000=100Ω, 1001=1K, 1002=10K, 1003=100K)
LP25 - 101 - J T 151 W
4000
4500
10Ω - 3.3KΩ
10Ω - 680Ω
10Ω - 680Ω
1.5Ω - 10KΩ
10Ω - 10KΩ
10Ω - 10KΩ
10Ω - 10KΩ
5000
Tolerance: F=1%, G= 2%, J= 5% (std), K=10%
7000**
±10%
Packaging: B = Bulk, T = Tape & Reel
1
2
1% tol avail in limited resis.range
LPT resis. may also be specified at 0°C (e.g. “101@0”, “1001@0”)
T.C. measured at 25°C and 65°C.
** 7000 ppm parts are marked alphanumerically. Operating temp. range is
-65 to +125°C, resis. tol. is 5% or 10%, hermetically sealed silicon
TC: Use 3-digit code (151=150ppm, 102=1000ppm, 452=4500ppm)
Termination: W=Pb-free, Q=SnPb (leave blank if either is acceptable)
*
-
-
-
-
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603 669 0054 Fax: 603 669 5455 Email:sales@rcdcomponents.com
FA089A Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
84