MLL14KESD5.0 thru MLL14KESD170A, e3
SURFACE MOUNT TVS
S C O T T S D A L E D I V I S I O N
DESCRIPTION
APPEARANCE
These surface mount Transient Voltage Suppressor (TVS) devices feature
the ability to clamp dangerous high voltage short-term transients such as
produced by direct or radiated electro-static discharge phenomena before
entering sensitive component regions of a circuit design. They are small
economical TVSs targeted primarily for short term transients below a few
microseconds while still achieving significant peak-pulse-power capability
as seen in Figure 1.
DO-213AB
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
•
•
Excellent protection in clamping direct ESD level
transients in excess of 40,000 V per MIL-STD-750,
Method 1020 (approx. 150 ns exponential wave)
•
Protects Sensitive circuits from short duration fast
rise time transients such as Electrostatic Discharge
(ESD) or Electrical Fast Transients (EFT)
Absorbs ESD level transients of 14,000 Watts per MIL-
STD-750, Method 1020 (approximately 150 ns
exponential wave, or one microsecond transients up to
4000 watts. See Figure #1 and #2 for overall transient
Peak Pulse Power.
•
•
Minimal capacitance (See Figure #3)
Small surface-mount footprint for high density
mounting
•
Bidirectional features available by adding a “C” or
“CA” suffix to part number
•
•
•
Clamps Transients in less than 100 picoseconds
Working Stand-off Voltage range of 5V to 170V
Hermetic DO-213AB package. Also available in axial-
leaded DO-41package (see separate data sheet for
14KESD5.0 series)
•
RoHS Compliant devices available by adding “e3” suffix
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
•
4000 Watts for One Microsecond Square Wave or
14,000 watts per ESD Wave form of MIL-STD-750,
method 1020.
•
•
CASE: Hermetically sealed DO-213AB glass MELF
package
FINISH: End caps are tin-lead or RoHS compliant
matte-Tin plated solderable per MIL-STD-750,
method 2026
•
•
•
See Surge Rating curve in Figures #1 and 2.
Operating and storage temperature –65oC to 175oC
Thermal Resistance: 40 ºC/W junction to end cap, or
120ºC/W junction to ambient when mounted on FR4
PC board (1 oz Cu) with recommended footprint (see
last page)
•
•
•
POLARITY: Cathode indicated by band.
MARKING: Cathode band only
TAPE & REEL optional: Standard per EIA-481-B
with 12 mm tape, 1500 per 7 inch reel or 5000 per
13 inch reel (add “TR” suffix to part number)
•
Steady-State Power: 1.50 watts at TEC < 115oC, or
1.25 watts at TA = 25ºC when mounted on FR4 PC
board and recommended footprint as described for
thermal resistance (also see Figure 1)
•
•
WEIGHT: 0.05 grams
See package dimensions on last page
•
•
Derate at 22.8 W/oC above 25oC for PPP (1μs) and at
15 mW/oC above 75oC for dc power.
Forward Surge Current 500 amps for 1μs at TL =
25oC (rise time > 100 ns).
Copyright © 2007
8-27-2007 REV D
Microsemi
Page 1
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503