MLL1.4KESD5.0 thru MLL1.4KESD170CA
SURFACE MOUNT TVS
S C O T T S D A L E D I V I S I O N
DESCRIPTION
APPEARANCE
These small surface mount TVS devices feature the ability to clamp
dangerous high voltage short-term transients such as produced by directed
or radiated electrostatic discharge phenomena before entering sensitive
component regions of a circuit design. They are small economical transient
voltage suppressors targeted primarily for short-term transients below a few
microseconds while still achieving significant peak-pulse-power capability
as illustrated in Figure #1.
DO-213AA
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
•
•
Excellent protection in clamping direct ESD level
transients in excess of 15,000 V per MIL-STD-750,
Method 1020 (approx. 150 ns exponential wave)
Absorbs ESD level transients* of 1400 Watts per
MIL-STD-750, Method 1020 (approx. 150 ns
exponential wave, or one microsecond transients up
to 400 watts. See Figure #1 and #2 for overall
transient Peak Pulse Power.
Clamps Transients in less than 100 picoseconds
Working Stand-off Voltage range of 5 V to 170 V
Hermetic DO-213AA Package. Also available in
axial-leaded DO-35 package (see separate data
sheet for 1.4KESD5.0 series)
•
•
Protects Sensitive circuits from short duration fast
rise time transients such as Electrostatic Discharge
(ESD) or Electrical Fast Transients (EFT)
Low inherent capacitance for high-frequency
applications (See Figure #4)
•
•
Small surface mount foot print
Bidirectional features available by adding a “C” or
“CA” suffix
•
•
•
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
•
400 Watts for One Microsecond Square Wave or
1400 watts per ESD Wave form of MIL-STD-750,
method 1020
•
•
CASE: Hermetically sealed glass DO-213AA surface
mount package
TERMINALS: Leads, tin-lead plated solderable per
MIL-STD-750, method 2026
POLARITY: Banded end is cathode
WEIGHT: 0.04 grams (typical)
MARKING: Cathode band only
•
•
•
See Surge Rating curves in Figures #1, 2 and 3
Operating and storage temperature –65oC to 175oC
•
•
•
•
THERMAL RESISTANCE: 150oC/W junction to end
cap
•
•
DC power dissipation 500 mW at TEC ≤ 100oC
TAPE & REEL option: Standard per EIA-481-B (add
Derate at 2.3 W/oC above 25oC for PPP (1µs) and at
“TR” suffix to part number)
6.67 mW/oC above 100oC for dc power
•
See package dimension on last page
•
Forward Surge Current 50 amps for 1µs at TL = 25oC
(rise time > 100 ns)
Copyright 2003
Microsemi
Page 1
10-06-2003 REV A
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503