MLC822A
8-Bit micro-controller with 660 dots LCD Driver
Features
♦ Internal R-type VLCD divider
• Single chip 8-bit micro-controller
• Operating voltage: 2.4V to 5.5V
• Memory :
♦ Program ROM: 48*1024 Bytes
♦ 10 level programmable frame rate from
56.7Hz to 113.8Hz
• Two re-loadable 8-bit timers
♦ Data RAM (stack RAM included) : 3072
Bytes
• Two dividers
One 14-bit divider with the clock source
from sub-oscillator to generate a 2-Hz
interrupt
♦ LCD RAM : 88 Bytes
• 10 input/output pins:
♦ Dedicated I/O pins: P0[5:0]
♦ Share pin I/O:
One 7-bit divider with the clock source
from main oscillator
ꢀP0[7:6]/(UART TX, RX)
ꢀP1[0:1]/(SCLK, SDIO)
• Build-in dual oscillation circuit:
♦ Ring oscillator up to
5MHz at 3.6V – 5.5V
• Half duplex UART function
4MHZ at 2.4V – 3.4V
• Build-in Megawin E-flash interface
• Dedicated SPK pin for tone output
for main oscillator (Fosc)
♦ 32768Hz crystal oscillator for
• LCD driver output:
sub-oscillator (Fx32
)
♦ Max 60 segment × 11 common
♦ 1/11, 1/10, 1/9 duty and 1/4, 1/5 bias
driving mode
• Build-in 8-level battery-low detector circuit
This document contains information on a new product under development by MEGAWIN. MEGAWIN reserves the right to change or discontinue
this product without notice.
MEGAWIN Technology Co., Ltd. 2004 All rights reserved.
2003/01/19 version A4
MEGAWIN