5ꢀ3ꢀPOWERINDUCTORS
High-Reliability Power Inductors ML486PYA
■ High temperature materials allow operation in ambient
temperatures up to 155°C.
■ Passes vibration testing to 80 G and shock testing to 1000 G
■ High current and very low DCR
■ Soft saturation makes them ideal for VRM/VRD applications.
Core material Composite
Terminations RoHS compliant tin-silver (96.5/3.5) over copper.
Weight 0.44 – 0.51 g
Ambient temperature –55°C to +105°C with Irms current, +105°C to
+155°C with derated current
Storage temperature Component: –55°C to +155°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging 400 per 7″reel
Plastic tape: 16 mm wide, 0.3 mm thick, 8 mm pocket spacing,
3.18 mm pocket depth
DCR (mOhms)3
SRF (MHz)4
Irms (A)6
2ꢀ°C rise 4ꢀ°C rise
Inductance2
2ꢀ0 (µH)
Part number1
typ
max
min
typ
Isat (A)5
ML486PYA161MLZ
ML486PYA331MLZ
ML486PYA601MLZ
ML486PYA801MLZ
0.16
0.33
0.60
0.80
2.15
3.20
4.11
5.14
2.36
3.52
4.52
5.65
146
86
60
183
108
75
31.0
23.0
17.6
15.1
10.7
10.4
10.2
7.5
16.7
14.4
13.3
9.8
50
63
ML486PYA122MLZ
ML486PYA222MLZ
ML486PYA332MLZ
ML486PYA472MLZ
1.2
2.2
3.3
4.7
8.50
13.20
21.20
32.70
9.40
14.50
23.30
36.00
49
30
22
18
61
38
28
23
12.5
9.1
7.1
5.8
6.5
5.4
4.4
3.2
8.3
7.3
6.1
4.4
1. When ordering, please specify testing code:
Irms Testing
ML486PYA472MLZ
Testing: Z = COTS
H = Screening per Coilcraft CP-SA-10001
N = Screening per Coilcraft CP-SA-10004
2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A.
3. DCR measured on a micro-ohmmeter.
Irms testing was performed on a
0.060″ thick pcb with 4 oz. copper
traces optimized to minimize
additional temperature rise.
Temperature rise is highly
dependent on many factors
including pcb land pattern,
trace size, and proximity to
other components. Therefore
temperature rise should be
verified in application conditions.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. Typical dc current at which the inductance drops 30% from its value without current.
6. Typical current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document ML794-1 Revised 07/20/12
®
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Email cps@coilcraft.com Specifications subject to change without notice.
www.coilcraft-cps.com Please check our web site for latest information.
Fax 847-639-1508
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
© Coilcraft, Inc. 2012