AIRCOREINDUCTORS
ML350RAT
ML394RAT
High-Reliability AirCoreInductors
■ High Q over a wide range of frequencies
■ High temperature marterials allow operation in ambient
temperatures up to 155°C.
Terminations Tin-silver over copper
Ambient temperature –55°C to +125°C with Imax current, +125°C
to +155°C with derated current
Storage temperature Component: –55°C to +155°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging
ML350RAT: 500 per 7″ reel Plastic tape: 8 mm wide, 0.3 mm thick,
4 mm pocket spacing, 1.5 mm pocket depth
ML394RAT: 500 per 7″ reel Plastic tape: 12 mm wide, 0.3 mm thick,
4 mm pocket spacing, 1.6 mm pocket depth
SRF DCR
L2 Percent Q3 min4 max5 Imax
Partnumber1 Turns (nH)
tol
min (GHz) (mOhm) (A)
ML350RAT1N7KLZ
ML350RAT2N6JLZ
ML350RAT3N9_LZ
ML350RAT5N4_LZ
2
3
4
5
1.65
2.55
3.85
5.40
10
5
5,2
5,2
100 10.0
4.0
5.0
6.0
8.0
1.6
1.6
1.6
1.6
100
100
100
8.2
7.5
7.0
ML394RAT5N6_LZ
ML394RAT7N2_LZ
ML394RAT8N8_LZ
ML394RAT9N9_LZ
6
7
8
9
5.60
7.15
8.80
9.85
5,2
5,2
5,2
5,2
5,2
100
100
100
100
100
6.5
6.0
6.0
5.2
4.6
9.0
10
12
13
14
1.6
1.6
1.6
1.6
1.6
ML394RAT13N_LZ 10 12.55
1. When ordering, specify tolerance and testing codes:
ML394RAT10GLZ
Tolerance: G = 2% J = 5%
Testing:
Z = COTS
H = Screening per Coilcraft CP-SA-10001
N = Screening per Coilcraft CP-SA-10003
2. Inductance measured at 800 MHz on an Agilent/HP 4286A or equiva-
lent with a Coilcraft SMD-A test fixture and correlation.
3. Q measured at 800 MHz on an Agilent/HP 4291A or equivalent with a
16193A test fixture or equivalent.
4. SRF measured on an Agilent/HP 8753ES or equivalent with a Coilcraft
CCF1268 test fixture. Parts with SRF >5 GHz are verified to >5 GHz in
screening.
5. DCR measured on a Keithley 580 Micro-Ohmmeter or equivalent.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
inches
Dimensions are in
mm
Specifications subject to change without notice.
®
Please check our website for latest information. Document ML163-1 Revised 09/08/11
Phone 800-981-0363
Fax 847-639-1508
E-mail cps@coilcraft.com
Web www.coilcraft-cps.com
1102 Silver Lake Road
Cary IL 60013
© Coilcraft, Inc. 2011