MINT1065
65W Single Output Series
Medical & ITE – Universal Input Power Supply
3 Year Warranty
•65W Convection Cooled AC-DC Power Supply
•Universal Input 90-264 VAC
•Less than 0.5W No Load Power Dissipation
•Rugged EMC Compliant Design
•2” x 4” x 1.2” Package
•Approved to EN/IEC/UL60601-1, 2nd Edition
•Approved to EN/IEC/UL60950-1, 2nd Edition
•Meets Efficiency Level IV Efficiency
•
Compliant (LVD, RoHS)
Specifications
All Specifications are typical at nominal input, full load at 25C unless otherwise stated.
AC Input
Turn On Time
100-240VAC +/- 10%, 47-63 Hz single phase.
Less than 1 second under all rated load conditions.
Input Current
Hold-up Time
115VAC: 0.7A, 230VAC: 1.5A.
<17 ms at 65W, nominal input (120VAC).
Inrush Current
Overvoltage Protection
The inrush at 264VAC, at a cold start, will not exceed 40A.
Built-in
Input Fuses
Overload Protection
F1, F2: 2.5A, 250VAC fuses provided on all models.
Earth Leakage Current
<300μA @ 264Vac, 60Hz, normal; <500μA SFC.
Efficiency
Hiccup Mode
Short Circuit Protection
Hiccup Mode
Switching Frequency
Up to 90% typical.
Output Power
65W continuous.
Variable 50-75kHz typical.
Medical Safety Standards
EN/IEC/UL 60601-1, 2nd Edition, EN/IEC/UL60950-1, 2nd Edition
Ripple and Noise
Isolation
1% pk-pk max., 20MHz BW, differential mode. Measured with noise
probe directly across output terminals.
Input-Output: 4000VAC, Input-Ground: 1800VAC, Output-Ground:
500VAC
Output Voltage
Operating Temperature
See chart.
0 to 70C (derate from full rated power above 40C).
Voltage Adjustability
Cooling
Voltage pre-set by fixed resistance.
Convection
Minimum Load
Output Power Derating
Not required.
See derating chart
Total Regulation
+/- 2%. See chart.
Storage Temperature
-40 to +85C.
Transient Response
500μs max., 50% load step, typical.
Relative Humidity
5% to 95%, non-condensing
______________________________________________________________________________________________________________________________ 1 of 3
SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info@slpower.com www.slpower.com