MINT1110A
110W Single Output Series
Medical – Universal Input Power Supply
2 Year Warranty
•
•
•
•
•
•
110W Convection Cooled AC-DC Power Supply
Universal Input 90-264 VAC
Less than 1.27” Height
Rugged EMC Compliant Design
3” x 5” Package
Approved to EN/IEC/UL60601-1 for Medical
•
Compliant (LVD, RoHS)
Specifications
AC Input
100-240VAC +/- 10%, 47-63 Hz single phase.
Input Current
115VAC: 1.4A.
All Specifications are typical at nominal input, full load at 25°C unless otherwise stated.
Turn On Time
Less than 2 seconds under all rated load conditions.
Hold-up Time
16 ms at 110W, nominal input (120VAC).
Overvoltage Protection
Inrush Current
The inrush at 264VAC, at a cold start, will not exceed 40A.
Input Fuses
F1, F2: 2.5A, 250VAC fuses provided on all models.
See chart for levels, latching type
Overload Protection
Hiccup Mode
Power Factor
Complies with EN61000-3-2.
Short Circuit Protection
Hiccup Mode
Efficiency
87% typical.
Overtemperature Protection
Provided on all models.
Output Power
90 - 110W continuous.
Medical Safety Standards
EN/IEC/UL 60601-1, CSA22.2, No. 601.1
Ripple and Noise
1% pk-pk max., 20MHz BW, differential mode. Measured with noise
probe directly across output terminals.
Isolation
Input-Output: 4000VAC, Input-Ground: 1500VAC, Output-Ground:
500VDC
Output Voltage
See chart.
Earth Leakage Current
<130µA at 264Vac, 60Hz.
Operating Temperature
Minimum Load
Not required.
0° to 70°C (derate from full rated power above 40°C)
Output Power Derating
Total Regulation
See chart.
Derate Output Power by 2.5% per °C above 40°C, up to 70°C max.
Storage Temperature
-40 to +85°C.
Transient Response
500µs max., 50% load step, typical.
Relative Humidity
5% to 95%, non-condensing
1 of 3
______________________________________________________________________________________________________________________________
SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com