MIC24052
12V, 6A High-Efficiency Buck Regulator
SuperSwitcher II
General Description
Features
•
•
HyperLight Load efficiency – up to 80% at 10mA
Hyper Speed Control architecture enables
− High delta V operation (VIN = 19V and VOUT = 0.8V)
− Small output capacitance
Input voltage range: 4.5V to 19V
Output current up to 6A
The Micrel MIC24052 is
a
constant-frequency,
synchronous DC/DC buck regulator featuring adaptive on-
time control architecture. The MIC24052 operates over a
supply range of 4.5V to 19V. It has an internal linear
regulator which provides a regulated 5V to power the
internal control circuitry. The MIC24052 operates at a
constant 600kHz switching frequency in continuous-
conduction mode and can be used to provide up to 6A of
output current. The output voltage is adjustable down to
0.8V.
Micrel’s HyperLight Load® architecture provides the same
high-efficiency and ultra-fast transient response as the
Hyper Speed Control architecture under medium to heavy
loads, but also maintains high efficiency under light load
•
•
•
•
•
•
•
•
•
Up to 95% efficiency
Adjustable output voltage from 0.8V to 5.5V
±1% FB accuracy
Any Capacitor™ stable − zero-to-high ESR
600kHz switching frequency
Power good (PG) output
conditions
by
transitioning
to
variable-frequency,
Foldback current-limit and “hiccup mode” short-circuit
protection
discontinuous-mode operation.
The MIC24052 offers a full suite of protection features to
ensure protection of the IC during fault conditions. These
include undervoltage lockout to ensure proper operation
under power-sag conditions, thermal shutdown, internal
soft-start to reduce the inrush current, foldback current
limit and “hiccup mode” short-circuit protection. The
MIC24052 includes a power good (PG) output to allow
simple sequencing.
•
•
•
Safe start-up into pre-biased loads
–40°C to +125°C junction temperature range
Available in 28-pin 5mm × 6mm QFN package
Applications
•
•
•
Servers and work stations
Routers, switches, and telecom equipment
Base stations
The 6A Hyper Speed Control part, MIC24051, is also
available on Micrel’s web site.
All support documentation can be found on Micrel’s web
site at: www.micrel.com.
___________________________________________________________________________________________________________
Typical Application
Efficiency (VIN = 12V)
vs. Output Current
100
95
5.0V
3.3V
2.5V
1.8V
1.5V
1.2V
1.0V
0.9V
0.8V
90
85
80
75
70
65
60
55
50
0
1
2
3
4
5
6
7
8
OUTPUT CURRENT (A)
HyperLight Load, is a registered trademark of Micrel, Inc.
Hyper Speed Control, SuperSwitcher II, and Any Capacitor are trademarks of Micrel, Inc.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
M9999-120312-A
December 2012