MIC2132
75VDualPhase,AdvancedCOTBuckController,
Stackable for Multiphase Operation
Features
General Description
• Input Voltage Range: 8V to 75V
MIC2132 is a constant on-time, dual phase synchronous
buck controller featuring a unique adaptive on-time
control architecture with a stackable feature of up to
eight phases. MIC2132 operates over an input supply
range from 8V to 75V. The output voltage is adjustable
down to 0.6V with an ensured accuracy of ±1% at the
FBS pin. The device operates with programmable
switching frequency from 100 kHz to 1 MHz per phase.
• Input Down to 2V when VDD = 5V from External
Supply
• Adjustable Output Voltage from 0.6V to 28V
• Adaptive Constant On-Time Control:
- High DeltaV™ operation
- Any Capacitor™ stable
The Hyper Speed Control® architecture supports
ultrafast transient response under medium to heavy
loads. The soft start is also programmable externally
with a capacitor, thus enabling safe start-ups into heavy
loads. MIC2132 has a remote sense amplifier for
accurate output voltage control.
• 0.6V Internal Reference with ±1% Accuracy
• Novel Ripple Injection Method to Allow Greater
than 50% Duty Cycle Operation
• Operates in CCM, Stackable for Multiphase
Operation up to Eight Phases
• Accurate Current Balancing Between Phases
• Accurate 180° Phasing of Outputs
MIC2132 offers a full suite of protection features to
ensure protection of the IC during Fault conditions.
These include undervoltage lockout to ensure proper
operation, programmable soft start to reduce inrush
current, Hiccup mode short-circuit protection and
thermal shutdown.
• 100 kHz to 1 MHz Switching Frequency per Phase
• Secondary LDO to Improve System Efficiency
• Supports Start-up to Pre-Bias Output
• Remote Sense Amplifier for Tight Output Regulation
• Droop Feature to Support Adaptive Voltage
Positioning (AVP) for Improved Load
Transient Response
MIC2132 is available in a 32-pin, 5 mm x 5 mm VQFN
package with a -40°C to +125°C operating junction
temperature range.
• Precision Enable Function for Low Standby Current
• External Programmable Soft Start to Reduce
Inrush Current
Package Type
MIC2132
• Lossless RDSON Current Sensing with NTC
Temperature Compensation or Resistor Sensing
Method
32-Pin 5 mm x 5 mm VQFN* (ML)
• Programmable Current Limit and Hiccup Mode
Short-Circuit Protection
DH2
SW2
DL2
• Thermal Shutdown with Hysteresis
• -40°C to +125°C Junction Temperature Range
• Compact Size: 5 mm x 5 mm 32-Pin VQFN
Package
AGND
PGND
ILIM
• AEC-Q100 Qualified (VAO Suffix)
CSH
EN
Applications
• Distributed Power Systems
• Communications/Networking Infrastructure
• Printers, Scanners, Graphic and Video Cards
• FPGA, CPU, Memory, GPU Core Supplies
• Automotive POL
*
Includes Exposed Thermal Pad (EP); see
Table 3-1.
2022 Microchip Technology Inc. and its subsidiaries
DS20006654B-page 1