APPLICABLE STANDARD
OPERATING
STORAGE
-30℃ TO 85℃(NOTE 1)
40% TO 80% (NOTE 2)
MDF6-*DS-3.5C
300V AC/DC
-10℃ TO 60℃(NOTE 3)
40% TO 70% (NOTE 3)
MDF6-****SCF(##)
TEMPERATURE RANGE
OPERATING
HUMIDITY RANGE
TEMPERATURE RANGE
STORAGE
HUMIDITY RANGE
APPLICABLE
APPLICABLE
RATING
CONTACT
CONNECTOR
VOLTAGE
CURRENT
VOLTAGE
UL・CSA
RATING
UL:250V AC/DC
CSA: 30V AC/DC
CURRENT
7A/pin
6A/pin
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION VISUALLY AND BY MEASURING INSTRUMENT.
ACCORDING TO DRAWING.
X
X
X
X
MARKING CONFIRMED VISUALLY.
ELECTRIC CHARACTERISTICS
CONTACT RESISTANCE
20 mV MAX, 1mA (DC OR 1000 Hz)
30m MAX.
X
X
-
-
INSULATION
RESISTANCE
VOLTAGE PROOF
500V DC.
1000M MIN.
1500V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
X
-
MECHANICAL CHARACTERISTICS
MECHANICAL OPERATION 30 TIMES INSERTIONS AND EXTRACTIONS.
1) CONTACT RESISTANCE:
2) NO DAMAGE, CRACK OR LOOSENESS OF
PARTS.
30m MAX.
X
X
-
-
VIBRATION
SHOCK
FREQUENCY 10 TO 55 Hz, SINGLE AMPLITUDE
0.75 mm, AT 2 h, FOR 3 DIRECTIONS.
1) NO ELECTRICAL DISCONTINUITY OF 1s.
2) NO DAMAGE, CRACK OR LOOSENESS OF
PARTS.
490 m/s2 DURATION OF PULSE 11 ms AT 3 TIMES
FOR 3 DIRECTIONS.
1) NO ELECTRICAL DISCONTINUITY OF 1s.
2) NO DAMAGE, CRACK OR LOOSENESS OF
PARTS.
X
-
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
EXPOSED AT 40±2 C, 90 TO 95 , 96 h.
1) CONTACT RESISTANCE:
30m MAX.
(STEADY STATE)
X
X
X
2) INSULATION RESISTANCE: 1000M MIN.
3) NO DAMAGE, CRACK OR LOOSENESS OF
PARTS.
-
-
-
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE -55→ 5 TO 35→85→ 5 TO 35 C
1) CONTACT RESISTANCE:
30m MAX.
TIME
30→ 2 TO 3→ 30→ 2 TO 3 min
2) INSULATION RESISTANCE: 1000M MIN.
3) NO DAMAGE, CRACK OR LOOSENESS OF
PARTS.
UNDER 5 CYCLES.
RESISTANCE TO
SOLDERING HEAT
1) SOLDER BATH METHOD
SOLDER TEMPERATURE 260 C, FOR
IMMERSION DURATION 10 s.
2) MANUAL SOLDERING
NO DEFORMATION OF CASE OF EXCESSIVE
LOOSENESS OF THE TERMINALS.
SOLDERING IRON TEMPERATURE 350 C
FOR 3 SEC.
NO STRENGTH ON CONTACT
SOLDERABILITY
REMARKS
SOLDERED AT SOLDER TEMPERATURE, 245±3C SOLDER SHALL COVER MINIMUM OF 95 OF
X
FOR IMMERSION , DURATION, 5 s.
THE SURFACE BEING IMMERSED.
-
NOTE 1: INCLUDING TEMPERATURE RISE BY CURRENT
NOTE 2: NO CONDENSING
NOTE 3: APPLY TO THE CONDITION OF LONG TERM STORAGE FOR UNUSED PRODUCTS BEFORE MOUNTED ON PCB. AFTER MOUNTED
ON PCB, OPERATING TEMPERATURE AND HUMIDITY RANGE IS APPLIED FOR INTERIM STORAGE DURING TRANSPORTATION.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
Unless otherwise specified, refer to IEC 60512.
APPROVED
CHECKED
DESIGNED
DRAWN
HS.OKAWA
TS.KUMAZAWA
HK.HAYASHI
20200313
20200313
20200313
20200306
DS.HIROWATARI
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
ELC-162426-23-00
PART NO.
CODE NO.
MDF6-*DP-3.5DS(23)
CL547
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
△
1/1
FORM HD0011-2-1