FEATURES
MDC SERIES
UP TO 60 WATTS
MULTIPLE OUTPUT (2-8),
FACTORY CONFIGURABLE
DC/DC CONVERTERS
28 VOLT INPUT
• –55° to +100°C operation
• 16 to 40 VDC input
• Two to eight outputs
* Fully Isolated
• 50 V for up to 50 ms transient
protection
• Inhibit function
• Sync function available on
select modules
VDC OUTPUT
Mix or match volt-
ages and power to
configure from two
to eight outputs.
• Sense available on select
single output modules
• Short circuit protection
Size (max):MDCG-H 3.005 x 1.505 x 0.400 inches (76.33 x 38.23 x 10.16 mm)
MDCA-F 3.005 x 2.260 x 0.400 inches (76.33 x 57.40 x 10.16 mm)
Weight:
MDCG-H 100 grams maximum
MDCA-F 150 grams maximum
Screening: Standard or ES
Description
Features
Interpoint’s MDC Series™ of DC/DC converters offers a unique
product by effectively combining two, three, or four individual
modular DC/DC converters to provide more than one hundred
combinations. The modules are established high-reliability military
aerospace DC/DC converters with input voltages of 16 to 40 VDC
and a typical transient rating of 50 V for 50 milliseconds. All modules
operate from no-load to full load and provide a constant current limit
at each output.
All converters have an inhibit function. Remote sense and trim up to
0.6V is available on the 30 watt single modules. The 15 watt and 30
watt choices have synchronization - if two are used, the synchro-
nization functions are combined internally.
Table 1: Modules – Power and Vout
Power
Vout Features
3.3 Inhibit &
Sync &
Power
5 Watt
Vout Features
30 Watt
5
Inhibit
5
5.2
12
15
18
5
12
15
Sense/
Trim up
12
15
5
12
15
Inhibit &
Sync
15 Watt
3.3 Inhibit &
1.5 Watt
3.3 Inhibit
5
Sync
5
5.2
5.2
12
12
15
28
5
12
15
15
5
12
15
1