Compact Thick Film Chip Resistors
MCR01 (0402 size : 1 / 16W)
Features
1) Extremely small light
2) Highly reliable chip resistor
Ruthenium oxide dielectric offers superior resistance to the elements.
3) Electrodes not corroded by soldering
Thick film makes the electrodes very strong.
4) Flat surface further facilitates mounting
Mounting can also be automated.
ROHM resistors have approved ISO9001- / ISO/TS 16949- certification.
Ratings
Design and specifications are subject to change without notice. Carefully check the specification sheet supplied with the product
before using or ordering it.
Item
Conditions
Specifications
0.063W (1 / 16W)
Power must be derated according to the power derating curve in
Figure 1 when ambient temperature exceeds 70°C.
Rated power
at 70°C
100
80
60
40
20
0
−55
0
70
100 125
155
AMBIENT TEMPERATURE (°C)
Fig.1
Rated voltage
The voltage rating is calculated by the following equation.
If the value obtained exceeds the limiting element voltage,
the voltage rating is equal to the maximum operating voltage.
E: Rated voltage (V)
P: Rated power (W)
R: Nominal resistance (Ω)
E= P×R
Limiting element voltage
50V
Nominal resistance
See Table 1.
−55°C to +155°C
Operating temperature
Table 1
Jumper type
Resistance
Resistance range
(Ω)
Resistance temperature coefficient
Max. 50mΩ
1A
Resistance tolerance
(ppm / °C)
Rated current
1.0 to 9.1
(E24)
+500 / −250
Operating temperature
−55°C to +155°C
J ( 5%)
10 to 10M (E24)
200
100
100
50
F ( 1%)
D ( 0.5%)
10 to 2.2M (E24, E96)
10 to 91
(E24)
100 to 1M (E24)
www.rohm.com
2011.06 - Rev.M
1/3
c
○ 2011 ROHM Co., Ltd. All rights reserved.