Datasheet > MCP2515-I/SORB2

MCP2515-I/SORB2

更新时间： 2023-01-02 20:50:32

品牌	Logo	应用领域
美国微芯 - MICROCHIP		/
页数	文件大小	规格书
94页	1137K
描述
CAN controller with SPI interface, 125 deg C, -40C to +85C, 18-SOIC 300mil, TUBE

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

MCP2515-I/SORB2 数据手册

MCP2515

Stand-Alone CAN Controller with SPI Interface

Features

Description

Microchip Technology’s MCP2515 is a stand-alone

Controller Area Network (CAN) controller that imple-

ments the CAN specification, Version 2.0B. It is capable

of transmitting and receiving both standard and

extended data and remote frames. The MCP2515 has

two acceptance masks and six acceptance filters that

are used to filter out unwanted messages, thereby

reducing the host MCU’s overhead. The MCP2515

interfaces with microcontrollers (MCUs) via an industry

standard Serial Peripheral Interface (SPI).

• Implements CAN V2.0B at 1 Mb/s:

- 0 to 8-byte length in the data field

- Standard and extended data and remote

frames

• Receive Buffers, Masks and Filters:

- Two receive buffers with prioritized message

storage

- Six 29-bit filters

- Two 29-bit masks

• Data Byte Filtering on the First Two Data Bytes

(applies to standard data frames)

Package Types

18-Lead PDIP/SOIC

• Three Transmit Buffers with Prioritization and

Abort Features

TXCAN

RXCAN

17 RESET

16 CS

15 SO

14 SI

• High-Speed SPI Interface (10 MHz):

- SPI modes 0,0 and 1,1

CLKOUT/SOF

TX0RTS

TX1RTS

TX2RTS

OSC2

• One-Shot mode Ensures Message Transmission

is Attempted Only One Time

• Clock Out Pin with Programmable Prescaler:

SCK

- Can be used as a clock source for other

device(s)

12 INT

OSC1

11 RX0BF

10 RX1BF

• Start-of-Frame (SOF) Signal is Available for

Monitoring the SOF Signal:

20-Lead TSSOP

- Can be used for time slot-based protocols

and/or bus diagnostics to detect early bus

degradation

TXCAN

RXCAN

CLKOUT/SOF

TX0RTS

TX1RTS

RESET

SCK

INT

RX0BF

RX1BF

• Interrupt Output Pin with Selectable Enables

• Buffer Full Output Pins Configurable as:

- Interrupt output for each receive buffer

- General purpose output

TX2RTS

OSC2

• Request-to-Send (RTS) Input Pins Individually

Configurable as:

OSC1

- Control pins to request transmission for each

transmit buffer

20-Lead QFN*

- General purpose inputs

20 19 18 17

• Low-Power CMOS Technology:

- Operates from 2.7V-5.5V

15 SO

CLKOUT 1

TX0RTS

TX1RTS

- 5 mA active current (typical)

- 1 μA standby current (typical) (Sleep mode)

• Temperature Ranges Supported:

- Industrial (I): -40°C to +85°C

- Extended (E): -40°C to +125°C

SCK

INT

TX2RTS

* Includes Exposed Thermal Pad (EP); see Table 1-1.

 2003-2019 Microchip Technology Inc.

DS20001801J-page 1

12 3 4 5 6 7...94

中文翻译

下载PDF

与MCP2515-I/SORB2相关器件

型号	品牌	获取价格	描述	数据表
MCP2515-I/ST	MICROCHIP	获取价格	Stand-Alone CAN Controller With SPI⑩ Interfac
MCP2515-I/STG	MICROCHIP	获取价格	暂无描述
MCP2515-I/STRB4	MICROCHIP	获取价格	Two-wire, stand alone CAN controller, -40C to +85C, 20-TSSOP, TUBE
MCP2515-I/STVAO	MICROCHIP	获取价格	Serial I/O Controller, 1 Channel(s), 0.125MBps, CMOS, PDSO20
MCP2515-IP	MICROCHIP	获取价格	Stand-Alone CAN Controller With SPI Interface
MCP2515-ISO	MICROCHIP	获取价格	Stand-Alone CAN Controller With SPI Interface
MCP2515-IST	MICROCHIP	获取价格	Stand-Alone CAN Controller With SPI Interface
MCP2515T	MICROCHIP	获取价格	Stand-Alone CAN Controller with SPI Interface
MCP2515T-E	MICROCHIP	获取价格	Stand-Alone CAN Controller With SPI Interface
MCP2515T-E/ML	MICROCHIP	获取价格	Stand-Alone CAN Controller with SPI Interface

与MCP2515-I/SORB2相关文章

MBRS340T3G手册解读：参数说明、产品特性及应用
2024-06-28

4
PMOS管背靠背连接：串联还是并联？
2024-06-28

4
高压电解电容的分类与选型策略
2024-06-28

5
数码管：基本概念、分类、技术发展及市场趋势
2024-06-27

10

产品中心

服务支持

精选活动

关于我们

帮助中心

MCP2515-I/SORB2

MCP2515-I/SORB2 数据手册

与MCP2515-I/SORB2相关器件

与MCP2515-I/SORB2相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

MCP2515-I/SORB2

MCP2515-I/SORB2 数据手册

与MCP2515-I/SORB2相关器件

与MCP2515-I/SORB2相关文章

您还可以找

您在本页遇到什么问题？