RESISTORSwCAPS&COILSwDELAYLINES
THICK FILM CHIP RESISTORS AND JUMPERS
MC SERIES 50mW (0201) to 3W (2040)
ZC SERIES Zero-ohm Chip Jumpers
L
T
t
W
r Industry’s widest selection -
Industry’s lowest prices!
0.1Ω to 22M, 50mW to 3W, 0.25% to 5%, TC’s to 50ppm
r 0402, 0603, 0805, 1206 sizes heavily stocked in 1% & 5%
(other sizes available from stock in many popular values)
RCD’s Series MC resistors utilize precision thick film technology
offering inherently low inductance, exceptional reliability, and
superior performance under demanding applications. Heavy solder
plating with NO LEACHTM nickel barrier assures superb solderabil-
ity and long shelf life. State-of-the-art production line enables the
industry’s most precise accuracies (as tight as 0.25% 50ppm!)
thereby replacing more costly thin-film chips in many applications.
RCD offers low cost offshore assembly of SM and leaded
PCB’s. Why not consider us to assemble your products?
OPTIONS
r Lead-free solder terminations (Option ‘W’)
r User-trimmable chips (Option ‘U’)
r Increased pulse capability (Option ‘P’)
r Mil-spec screening/burn-in, special marking, non-standard
values & TC, high frequency designs, etc., are an RCD specialty!
Dimensions Inch[mm]
RCD Type Wattage Std TC** Res. Range
MC, ZC Rating ppm/°Ctyp ±0.5% Tol**
Res. Range
±1% Tol**
Resis Range
±5% Tol**
MC Voltage TYPE ZC
Rating** Jumper**
L
W
T
t
100
10Ω to 22KΩ
22.1K to 1MΩ
1 Amp Max. .024±.002 .012±.002 .010±.002 .006±.002
50mΩ Max. [0.6±.03] [.3±.03] [.25±.03] [.15±.05]
0201
.05W
200
400
100
200
400
100
200
400
100
200
400
100
200
400
100
200
400
100
200
400
100
200
400
100
200
400
10Ω to 1MΩ
1- 9.1Ω ,1.1M- 2.2M
25V
10Ω to 1MΩ
0402
Stock item
1 Amp Max. .040±.004 .020±.004 .014±.004 .010±.004
.063W
.1W
10Ω to 1MΩ
1- 9.1Ω ,1.1M- 4.7M
50V
50V
50mΩ Max. [1.00±.1]
[.5±.1]
[.35±.1]
[.25±.1]
1Ω to 9.76Ω
10Ω to 1MΩ
10Ω to 1M
10Ω to 1M
10Ω to 1M
10Ω to 1M
10Ω to 1M
10Ω to 1M
0603
Stock item
1 Amp Max. .061±.005 .031±.004 .016±.006 .010±.006
50mΩ Max. [1.55±.12] [.8±.1] [.40±.15] [.25±.15]
10Ω to 1MΩ
1- 9.1Ω ,1.1M- 10M
1Ω to 9.76Ω
10Ω to 1MΩ
0805
Stock item
1.5Amp Max. .079±.005 .050±.006 .020±.006 .016±.008
50mΩ Max. [2.0±.15] [1.25±.15] [.50±.15] [.4±.2]
.125W
.25W
10Ω to 1MΩ
150V
200V
200V
200V
250V
350V
0.1-9.76Ω, 1.02M-10M 0.1-9.1Ω, 1.1M-20M
10Ω to 1MΩ
1.02M to 5.6M
0.1-9.76Ω, 5.62M-10M 0.1-9.1Ω, 6.2M-22M
10Ω to 1MΩ
1.02M to 5.6M
0.1-9.76Ω, 5.62M-10M 0.1-9.1Ω, 6.2M-22M
10Ω to 1MΩ
1.02M to 5.6M
0.1-9.76Ω, 5.62M-10M 0.1-9.1Ω, 6.2M-22M
10Ω to 1MΩ
1206
Stock item
2 Amp Max. .126±.008 .061±.006 .024±.006 .020±.008
50mΩ Max. [3.2±.2] [1.55±.15] [.61±.15] [.51±.2]
10Ω to 5.6MΩ
3 Amp Max. .126±.008 .098±.008 .024±.008 .020±.010
1210
2010
2512
2040
.33W
10Ω to 5.6MΩ
50mΩ Max. [3.2±.2]
[2.5±.2]
[.6±.2]
[.5±.25]
3 Amp Max. .197±.008 .102±.008 .024±.008 .020±.010
50mΩ Max. [5.0±.2] [2.6±.2] [.6±.2] [.50±.25]
.75W
10Ω to 5.6MΩ
4 Amp Max. .250±.01 .125±.010 .024±.008 .034±.021
50mΩ Max. [6.35±.25] [3.2±.25] [.6±.2] [.86±.53]
1.0W
1.02M to 5.6M
0.1-9.76Ω, 5.62M-10M 0.1-9.1Ω, 6.2M-22M
10Ω to 5.6MΩ
10Ω to 1MΩ
10Ω to 1MΩ
1- 9.1Ω
.201±.008 .402±.008 .024±.008 ±.018
[5.1±.2] [10.2±.2] [.6±.2] [1.4±.46]
2.0/3.0*
N/A
* 2040 chips may be operated up to 3W with consideration of mounting density, termination pad area, board material, and ambient temperature to control self-heating to 155°C. ** Extended range avail.
TYPICAL PERFORMANCE
PULSE WITHSTAND CHART (increased pulse levels avail.)
500
Thermal Shock (-55° to +125°C)
Overload (2.5x W, 5S, NTE 2x rated V)
Low Temp. Operation (-55°C)
High Temp. Exposure (125°C, 100hrs)
Resistance to Solder Heat
0.2% ∆R
1% ∆R
0.2% ∆R
0.5% ∆R
0.2% ∆R
100
Moisture Resistance
Load Life(1000 hrs.)
Operating Temp. (+175°C avail.)
Power Derating (above 70°C)
0.5% ∆R
1.0% ∆R
-55 to +155°C
Derate by 1.18%/°C
MC2512P
MC2010P
MC1210P
MC1206P
MC0805P
MC0603P
MC0402P
10
1
MC 1206
- 2210 - F T
P/N DESIGNATION:
RCD Type: MC or ZC
Chip Size: 0201 to 2040
1uS
10uS
100uS
Pulse Duration
1mS
10mS
100mS
Options: W, U, P, etc (leave blank if std)
Resis. Value: 4 digit code if tol. is 0.25% to 1%
(R100=.1Ω, 1R00=1Ω, 10R0=10Ω, 1000=100Ω, 1001=1KΩ)
3 digit code if tol. is 2% or 5% (R10=0.1Ω, 1R0=1Ω, 100=10Ω,
101=100Ω, 102=1KΩ) Leave blank on ZC zero-ohm chips
Pulse capability is dependent on res. value, waveform, repetition, etc.
Chart is a general guide for Opt. P version, single or infrequent pulses,
with peak voltage levels not exceeding 150V for 0402 & 0603 size,
300V for 0805, 400V for 1206 & 1210, 450V for 2010 & 2512. Max
pulse wattage for standard parts (w/o Opt.P) is 50% less, max pulse
voltage is 50V less. Increased pulse levels available. For improved
performance and reliability, a 30% pulse derating factor is recommended
(50% for frequent pulses, high values, etc). Consult RCD for application
assistance. Verify selection by evaluating under worst-case conditions.
Tolerance: J=5%, G=2%, F=1%, D=0.5%, C=0.25%
Leave blank on ZC zero-ohm chips. Opt.U trimmable
chips use W=±15%, M=±20%, U=0 to +30%)
Packaging: B=Bulk, T=Tape & Reel
TC: 50=50ppm, 101=100ppm, 201=200ppm (leave blank if std)
RCD Components Inc., 520 E. Industrial Park Dr., Manchester, NH USA 03109
Tel: (603) 669-0054 Fax:(603) 669-5455 E-mail: sales@rcdcomponents.com www.rcdcomponents.com
FA033C Specifications subject to change without notice