MASTER INSTRUMENT CORPORATION
MB2505 THRU MB2510
VOLTAGE RANGE 50 to 1000 Volts
CURRENT
25 Amperes
KBPC25005 THRU KBPC2510
FEATURES
l Low cost
MB-35
1.14( 28.9)
1.12( 28.4)
l This series is UL recognized under component
index, file number E127707
0.666( 16.9)
0.626( 15.9)
+
l High forward surge current capability
l Ideal for printed circuit board
l High isolation voltage from case to leads
l High temperature soldering guaranteed:
260oC/10 second, at 5 lbs. (2.3kg) tension.
AC
1.14( 28.9)
1.12( 28.4)
0.728( 18.5)
0.688( 17.5)
0.666( 16.9)
0.626( 15.9)
-
AC
0.570( 14.5)
0.530( 13.5)
0.205( 5.2)
0.197( 5.0)
DIA
MECHANICAL DATA
l Case: Molded plastic body
0.46( 11.7)
0.41( 10.5)
EXOPY CASE
l Terminal: Plated 0.25” (6.35mm) lug.
l Polarity: Polarity symbols marked on case
l Mounting: Thru hole for #10 screw, 20 in.-lbs torque max.
l Weight:1.02 ounce, 29 grams
0.472( 12.0)
0.374( 9.5)
0.033( 0.84)
0.028( 0.71)
0.252( 6.4)
0.248( 6.3)
0.252( 6.4)
0.248( 6.3)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%.
MB2505
MB251
MB252
MB254
MB256
MB258
MB2510
SYMBOLS
UNITS
KBPC25005 KBPC2501 KBPC2502 KBPC2504 KBPC2506 KBPC2508 KBPC2510
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
VRRM
VRMS
VDC
50
35
50
100
70
200
140
200
400
280
400
600
420
600
800
560
800
1000
700
Volts
Volts
Volts
Amps
Maximum DC Blocking Voltage
100
1000
Maximum Average Forward
Rectified Output Current, at TC=55℃(Note1,2)
I(AV)
25
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed on rated load (JEDEC
Method)
Rating for Fusing(t<8.3ms)
Maximum Instantaneous Forward Voltage at 12.5A
IFSM
300
Amps
I2T
VF
373
1.1
10
A2S
Volts
TA=25℃
mAmps
mAmps
Maximum DC Reverse Current at
rated DC blocking voltage
IR
TA=100℃
1.0
Isolation Voltage from case to lugs
Typical Thermal Resistance (Note 1,2)
Operating Temperature Range
VISO
RqJC
TJ
2500
2.0
VAC
℃/W
℃
-55 to +150
-55 to +150
Storage Temperature Range
TSTG
℃
NOTES:
1.
2.
Unit mounted on 5”×6”×4.9”(12.8×15.2×12.4mm) Al. finned plate.
Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer efficiency with #10 screw.
Web Site:
WWW.PS-PFS.COM