Datasheet > MAX9969ALCCQ-D

MAX9969ALCCQ-D

更新时间： 2024-01-13 02:38:46

品牌	Logo	应用领域
美信 - MAXIM		/
页数	文件大小	规格书
31页	889K
描述
Analog Circuit, 1 Func, PQFP100, 14 X 14 MM, 1 MM HEIGHT, TQFP-100

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

MAX9969ALCCQ-D 技术参数

是否Rohs认证：	不符合	生命周期：	Obsolete
零件包装代码：	QFP	包装说明：	14 X 14 MM, 1 MM HEIGHT, TQFP-100
针数：	100	Reach Compliance Code：	not_compliant
ECCN代码：	EAR99	HTS代码：	8542.39.00.01
风险等级：	5.66	模拟集成电路 - 其他类型：	ANALOG CIRCUIT
JESD-30 代码：	S-PQFP-G100	JESD-609代码：	e0
长度：	14 mm	湿度敏感等级：	3
负电源电压最大值（Vsup）：	-5.25 V	负电源电压最小值（Vsup）：	-4.5 V
标称负供电电压 (Vsup)：	-4.75 V	功能数量：	1
端子数量：	100	最高工作温度：	70 °C
最低工作温度：		封装主体材料：	PLASTIC/EPOXY
封装代码：	TFQFP	封装形状：	SQUARE
封装形式：	FLATPACK, THIN PROFILE, FINE PITCH	峰值回流温度（摄氏度）：	245
认证状态：	Not Qualified	座面最大高度：	1.2 mm
最大供电电压 (Vsup)：	10.5 V	最小供电电压 (Vsup)：	9.5 V
标称供电电压 (Vsup)：	9.75 V	表面贴装：	YES
温度等级：	COMMERCIAL	端子面层：	Tin/Lead (Sn/Pb)
端子形式：	GULL WING	端子节距：	0.5 mm
端子位置：	QUAD	处于峰值回流温度下的最长时间：	NOT SPECIFIED
宽度：	14 mm	Base Number Matches：	1

MAX9969ALCCQ-D 数据手册

19-3389; Rev 0; 8/04

Dual, Low-Power, 1200Mbps ATE

Driver/Comparator with 35mA Load

General Description

Features

ꢀ Low-Power Dissipation: 1.4W/Channel (typ)

The MAX9969 dual, low-power, high-speed, pin elec-

tronics driver/comparator with 35mA load IC includes,

for each channel, a three-level pin driver, a dual com-

parator, variable clamps, and an active load. An addi-

tional differential comparator allows comparisons

between the two channels. The driver features a wide

voltage range and high-speed operation, includes high-

impedance and active-termination (3rd-level drive)

modes, and is highly linear even at low voltage swings.

The dual comparator provides low dispersion (timing

variation) over a wide variety of input conditions, and

differential outputs. The clamps provide damping of

high-speed device-under-test (DUT) waveforms when

the device is configured as a high-impedance receiver.

The programmable load supplies up to 35mA of source

and sink current. The load facilitates contact/continuity

testing, at-speed parametric testing of IOH and IOL,

and pullup of high-output-impedance devices. The

MAX9969A features tighter matching of offset for the

drivers and the comparators.

ꢀ Greatly Reduced Power Penalty when Load

Commutated

ꢀ High Speed: 1200Mbps at 3V

and 1800Mbps

P-P

at 1V

P-P

ꢀ Programmable 35mA Active-Load Current

ꢀ Low Timing Dispersion

ꢀ Wide -1.5V to +6.5V Operating Range

ꢀ Active Termination (3rd-Level Drive)

ꢀ Low-Leakage Mode: 15nA

ꢀ Integrated Clamps

ꢀ Integrated Differential Comparator

ꢀ Interfaces Easily with Most Logic Families

ꢀ Digitally Programmable Slew Rate

ꢀ Internal Termination Resistors

ꢀ Low Offset Error

The MAX9969 provides high-speed, differential control

inputs with optional internal termination resistors that

are compatible with LVPECL, LVDS, and GTL. Flexible

open-collector outputs with optional internal pullup

resistors are available for the comparators. These fea-

tures significantly reduce the discrete component count

on the circuit board.

ꢀ Pin Compatible with the MAX9967

Ordering Information

PART

TEMP RANGE

0°C to +70°C

PIN-PACKAGE

100 TQFP-EPR**

MAX9969ADCCQ

MAX9969AGCCQ*

MAX9969ALCCQ

MAX9969ARCCQ*

MAX9969BDCCQ

MAX9969BGCCQ*

MAX9969BLCCQ

MAX9969BRCCQ

A 3-wire, low-voltage, CMOS-compatible serial inter-

face programs the low-leakage, slew-rate limit, and tri-

state/terminate operational configurations of the

MAX9969.

The MAX9969’s operating range is -1.5V to +6.5V with

power dissipation of only 1.4W per channel. The device

is available in a 100-pin, 14mm x 14mm body, and

0.5mm pitch TQFP. An exposed 8mm x 8mm die pad

on the top of the package facilitates efficient heat

removal. The device is specified to operate with an

internal die temperature of +60°C to +100°C, and fea-

tures a die temperature monitor output.

*Future product—contact factory for availability.

**EPR = Exposed pad reversed (TOP).

Applications

High-Performance Mixed-Signal/

System-on-Chip ATE

High-Performance Memory ATE

Pin Configuration and Selector Guide appear at end of data sheet.

________________________________________________________________ Maxim Integrated Products

For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at

1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.

12 3 4 5 6 7...31

下载PDF

与MAX9969ALCCQ-D相关器件

型号	品牌	描述	获取价格	数据表
MAX9969ALCCQ-T	MAXIM	Interface Circuit, BIPolar, PQFP100	获取价格
MAX9969ALCCQ-TD	MAXIM	Analog Circuit, 1 Func, PQFP100, 14 X 14 MM, 1 MM HEIGHT, TQFP-100	获取价格
MAX9969ARCCQ	MAXIM	Dual, Low-Power, 1200Mbps ATE Driver/Comparator with 35mA Load	获取价格
MAX9969BDCCQ	MAXIM	Dual, Low-Power, 1200Mbps ATE Driver/Comparator with 35mA Load	获取价格
MAX9969BDCCQ+TD	MAXIM	Analog Circuit, 1 Func, PQFP100, 14 X 14 MM, 1 MM HEIGHT, LEAD FREE, TQFP-100	获取价格
MAX9969BDCCQ-D	MAXIM	Analog Circuit, 1 Func, PQFP100, 14 X 14 MM, 1 MM HEIGHT, TQFP-100	获取价格

产品中心

服务支持

精选活动

关于我们

帮助中心

MAX9969ALCCQ-D

MAX9969ALCCQ-D 技术参数

MAX9969ALCCQ-D 数据手册

与MAX9969ALCCQ-D相关器件

与MAX9969ALCCQ-D相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

MAX9969ALCCQ-D

MAX9969ALCCQ-D 技术参数

MAX9969ALCCQ-D 数据手册

与MAX9969ALCCQ-D相关器件

与MAX9969ALCCQ-D相关文章

您还可以找

您在本页遇到什么问题？