Datasheet > MAX9937EVKIT

MAX9937EVKIT

更新时间： 2024-11-15 02:52:55

品牌	Logo	应用领域
美信 - MAXIM		/
页数	文件大小	规格书
6页	280K
描述
Lead(Pb)-Free and RoHS Compliant

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

MAX9937EVKIT 数据手册

Evaluates: MAX9937

MAX9937 Evaluation Kit

General Description

Procedure

The MAX9937 evaluation kit (EV kit) is an assembled and

tested PCB used to evaluate the MAX9937 current-sense

amplifier, designed for unidirectional high-side current-

sense applications. The EV kit can be used to dem-

onstrate the applicability of the MAX9937 to withstand

transients, such as load-dump protection, reverse-battery

protection, and filtering for EMI.

The MAX9937 EV kit is fully assembled and tested. Follow

the steps below to verify board operation. Caution: Do

not turn on power supplies until all connections are

completed.

1) Set the input power supply to 12V and connect the

positive terminal to the VBAT PCB pad. Connect the

ground of the power supply to the GND PCB pad.

2) Set the VCC power supply to 5V and connect the

positive terminal to the VCC PCB pad. Connect the

ground of the VCC supply to the GND pad.

Features

● Reverse-Battery and Load-Dump Protection

• -20V to +40V

3) Set the electronic load to sink 2A.

● +4V to +28V Input Common-Mode Range

● +2.7V to +5.5V Supply Range

● Flexible EMI Filtering

4) Connect the electronic load’s positive terminal to the

LOAD pad. Connect the load’s ground to the GND

PCB pad.

● Lead(Pb)-Free and RoHS Compliant

● Fully Assembled and Tested

5) Connect the DVM across the VOUT PCB pad and the

GND pad.

6) Turn on the 5V power supply.

7) Turn on the 12V power supply.

Quick Start

Recommended Equipment

8) Adjust the electronic load current (I

) between 0A

LOAD

Before beginning, the following equipment is needed:

● 12V, 2A power supply (VBAT)

and 2A and verify that V

according to the following equation:

is proportional to V

OUT SENSE

● 5V power supply (VCC)

SENSE

OUT

● Electronic load capable of sinking 2A

● Digital voltmeter (DVM)

where V

= I

x R1.

SENSE

LOAD

Ordering Information

PART

TYPE

MAX9937EVKIT+

EV Kit

*Denotes lead(Pb)-free and RoHS compliant.

19-4406; Rev 1; 5/15

12 3 4 5 6

中文翻译

下载PDF

与MAX9937EVKIT相关器件

型号	品牌	获取价格	描述	数据表
MAX9937EVKIT+	MAXIM	获取价格	Lead(Pb)-Free and RoHS Compliant
MAX9938	MAXIM	获取价格	1レA, 4-Bump UCSP/SOT23, Precision Current-Sen
MAX9938	ADI	获取价格	1μA、4焊球UCSP/SOT23封装、高精度电流检测放大器
MAX9938_09	MAXIM	获取价格	1μA, 4-Bump UCSP/SOT23, Precision Current-Sen
MAX9938_0910	MAXIM	获取价格	1μA, 4-Bump UCSP/SOT23, Precision Current-Sen
MAX9938_11	MAXIM	获取价格	1uA, 4-Bump UCSP/SOT23, Precision Current-Sense Amplifier
MAX9938_V01	MAXIM	获取价格	nanoPower, 4-Bump UCSP/SOT23, Precision Current-Sense Amplifier
MAX9938FEBS	MAXIM	获取价格	1レA, 4-Bump UCSP/SOT23, Precision Current-Sen
MAX9938FEBS+	MAXIM	获取价格	Operational Amplifier, 1 Func, 600uV Offset-Max, BICMOS, PBGA4, 1 X 1 MM, 0.60 MM HEIGHT,
MAX9938FEBS+G45	MAXIM	获取价格	1μA, 4-Bump UCSP/SOT23, Precision Current-Sen