19-1789; Rev 2; 1/12
Single/Dual, Ultra-Fast, ECL-Output
Comparators with Latch Enable
12/MAX693
General Description
Features
The MAX9691/MAX9692/MAX9693 are ultra-fast ECL
comparators capable of very short propagation delays.
Their design maintains the excellent DC matching char-
acteristics normally found only in slower comparators.
o 1.2ns Propagation Delay
o 100ps Propagation Delay Skew
o 150ps Dispersion
o 0.5ns Latch Setup Time
o 0.5ns Latch-Enable Pulse Width
o Available in µMAX and QSOP Packages
o +5V, -5.2V Power Supplies
The MAX9691/MAX9692/MAX9693 have differential
inputs and complementary outputs that are fully com-
patible with ECL-logic levels. Output current levels are
capable of driving 50Ω terminated transmission lines.
The ultra-fast operation makes signal processing possi-
ble at frequencies in excess of 600MHz.
Ordering Information
The MAX9692/MAX9693 feature a latch-enable (LE)
function that allows the comparator to be used in a
sample-hold mode. When LE is ECL high, the compara-
tor functions normally. When LE is driven ECL low, the
outputs are forced to an unambiguous ECL-logic state,
dependent on the input conditions at the time of the
latch input transition. If the latch-enable function is not
used on either of the two comparators, the appropriate
LE input must be connected to ground; the companion
LE input must be connected to a high ECL logic level.
TEMP
RANGE
PART
PIN-PACKAGE
MAX9691EUA
-40°C to +85°C
-40°C to +85°C
8 µMAX
8 SO
MAX9691ESA
MAX9691EPA
-40°C to +85°C
8 PDIP
Note: Devices are also available in lead(Pb)-free/RoHS-compli-
ant packages. Specify lead-free by adding a “+” after the part
number.
Ordering Information continued at the end of data sheet.
These devices are available in SO, QSOP, and tiny
®
µMAX packages for added space savings.
Selector Guide
COMPARATORS LATCH PIN-
PER PACKAGE ENABLE PACKAGE
________________________Applications
PART
High-Speed Line Receivers
8 µMAX,
8 SO, 8 PDIP
MAX9691
MAX9692
1
1
No
Peak Detectors
Threshold Detectors
High-Speed Triggers
10 µMAX,
16 SO, 16 PDIP
Yes
16 QSOP,
16 SO, 16 PDIP
MAX9693
2
Yes
µMAX is a registered trademark of Maxim Integrated Products, Inc.
Pin Configurations appear at end of data sheet.
_________________________________________________________Functional Diagrams
NONINVERTING
INPUT
NONINVERTING
INPUT
IN+
IN-
Q OUT
Q OUT
Q OUT
Q OUT
INVERTING
INPUT
INVERTING
INPUT
R
R
L
L
R
R
R
R
L
L
L
L
MAX9693
MAX9693
MAX9691
LE LE
LATCH ENABLE
LE LE
V
T
V
T
LATCH ENABLE
THE OUTPUTS ARE OPEN EMITTERS, REQUIRING EXTERNAL PULLDOWN
RESISTORS. THESE RESISTORS MAY BE IN THE RANGE OF 50Ω TO 200Ω
CONNECTED TO -2.0V, OR 240Ω TO 2000Ω CONNECTED TO -5.2V.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.