19-2376; Rev 1; 2/04
400Mbps, Low-Jitter, Low-Noise LVDS
Repeater in an SC70 Package
General Description
Features
The MAX9180 is a 400Mbps, low-voltage differential
signaling (LVDS) repeater, which accepts a single
LVDS input and duplicates the signal at a single LVDS
output. Its low-jitter, low-noise performance makes it
ideal for buffering LVDS signals sent over long dis-
tances or noisy environments, such as cables and
backplanes.
♦ Tiny SC70 Package
♦ Ultra-Low Jitter
23ps
Added Deterministic Jitter
P-P
(223 - 1 PRBS)
0.6ps Added Random Jitter
RMS
♦ 0.5ns (min) Transition Time Minimizes Radiated
The MAX9180’s tiny size makes it especially suitable for
minimizing stub lengths in multidrop backplane appli-
cations. The SC70 package (half the size of a SOT23)
allows the MAX9180 to be placed close to the connec-
tor, thereby minimizing stub lengths and reflections on
the bus. The point-to-point connection between the
MAX9180 output and the destination IC, such as an
FPGA or ASIC, allows the destination IC to be located
at greater distances from the bus connector.
Noise
♦ 400Mbps Guaranteed Data Rate
♦ Fail-Safe Circuit Sets Output High for Undriven
Inputs (Open, Terminated, or Shorted)
♦ Low 10mA Supply Current
♦ Low 6mA Supply Current in Fail-Safe
♦ Conforms to ANSI/EIA/TIA-644 LVDS Standard
Ultra-low, 23ps
added deterministic jitter and
P-P
0.6ps
added random jitter ensure reliable commu-
♦ High-Impedance Inputs and Outputs in
RMS
nication in high-speed links that are highly sensitive to
timing errors, especially those incorporating clock-and-
data recovery, PLLs, serializers, or deserializers. The
MAX9180’s switching performance guarantees a
400Mbps data rate, but minimizes radiated noise by
guaranteeing 0.5ns minimum output transition time.
Power-Down Mode
Ordering Information
The MAX9180 has fail-safe circuitry that sets the output
high for undriven open, short, or terminated inputs.
TOP
PIN-
PACKAGE
PART
TEMP RANGE
MARK
The MAX9180 operates from a single 3.3V supply and
consumes only 10mA over a -40°C to +85°C tempera-
ture range. Refer to the MAX9129 data sheet for a quad
bus LVDS (BLVDS) driver, and to the MAX9181 data
sheet for a low-jitter, low-noise 400Mbps LVPECL-to-
LVDS level translator in an SC70 package.
MAX9180EXT-T
-40°C to +85°C
6 SC70-6
ABH
Pin Configuration
Applications
Cellular Phone Base Stations
DSLAMs
TOP VIEW
MAX9180
Digital Cross-Connects
Add/Drop Muxes
OUT-
1
2
3
6
5
4
OUT+
Network Switches/Routers
Multidrop Buses
GND
IN-
V
CC
Cable Repeaters
IN+
SC70
Typical Operating Circuit appears at end of data sheet.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.