EVALUATION KIT AVAILABLE
Click here to ask about the production status of specific part numbers.
MAX77960B/MAX77961B
25V , 3A
to 6A , USB-C Buck-Boost
OUT
IN
OUT
Charger with Integrated FETs for 2S/3S Li-Ion
Batteries
General Description
Benefits and Features
The MAX77960B/MAX77961B are high-performance
wide-input 3A (MAX77960B)/6A (MAX77961B) buck-
boost chargers with Smart Power Selector™ and operate
as a reverse buck converter without an additional inductor,
allowing the ICs to power USB on-the-go (OTG) acces-
sories. The devices integrate low-loss power switches and
provide high efficiency, low heat, and fast battery charging
in a small solution size. The reverse buck has true load
disconnect and is protected by an adjustable output cur-
rent limit. The devices are highly flexible and programma-
● 3.5V to 25.4V Input Operating Range, 30V
DC
Withstand
● 97% Peak Efficiency for 2S Battery at
9V /7.4V
/1.5A
IN
OUT
OUT
● 97% Peak Efficiency for 3S Battery at
15V /12.6V
/2A
IN
OUT
OUT
● MAX77960B
• 100mA to 3.15A Programmable Input Current Limit
• 100mA to 3A Programmable Constant Current
Charge
2
ble through I C configuration or autonomously through re-
sistor configuration.
● MAX77961B
• 100mA to 6.3A Programmable Input Current Limit
• 100mA to 6A Programmable Constant Current
Charge
The battery charger includes the Smart Power Selector to
accommodate a wide range of battery sizes and system
loads. The Smart Power Selector allows the system to
start up smoothly when an input source is available even
when the battery is deeply discharged (dead battery) or
missing. For battery safety/authentication reasons, the ICs
can be configured to keep charging disabled, and allow
the DC-DC to switch and regulate the SYS voltage. The
● Remote Differential Voltage Sensing
● 600kHz or 1.2MHz Switching Frequency Options
● System Instant On with Smart Power Selector Power
Path
● Charge Safety Timer
● Die Temperature Regulation with Thermal Foldback
Loop
● Input Power Management with Adaptive Input Current
Limit (AICL) and Input Voltage Regulation
● 10mΩ BATT to SYS Switch, Up to 10A Overcurrent
Threshold
2
system processor can later enable charging using I C
commands as appropriate. Alternatively, the ICs can be
configured to automatically start charging.
Applications
● USB Type-C Powered Wide-Input Charging
● Reverse Buck Mode 5.1V/3A to Support USB OTG
Applications
● JEITA Compliant with NTC Thermistor Monitor
● I C or Resistor Programmable
● 4mm x 4mm, 30-Lead FC2QFN
● 2- and 3-Cell Battery-Powered Devices
● Smartphones, Tablets, and 2-in-1 Laptops
● Medical Devices, Health and Fitness Monitors
● Digital Still, Video, and Action Cameras
● Handheld Computers and Terminals
● Handheld Radios
2
Ordering Information appears at end of data sheet.
● Power Tools
● Drones
● Battery Backup
● Wireless Speakers
Smart Power Selector is a trademark of Maxim Integrated Products, Inc.
19-101123; Rev 0; 6/21