19-3475; Rev 0; 10/04
Silicon Oscillator with Reset Output
General Description
Features
The MAX7376 silicon oscillator with reset, is a replace-
ment for ceramic resonators, crystals, crystal oscillator
modules, and discrete reset circuits. The MAX7376 pro-
vides the primary clock source and reset function for
microcontrollers in 3V, 3.3V, and 5V applications. The
MAX7376 features a factory-programmed high-speed
oscillator and a microprocessor (µP) power-on-reset
(POR) supervisor.
♦ 2.7V to 5.5V Operation
♦ Accurate Oscillator: 600kHz to 10MHz or 32kHz
♦ Reset Output Holds the µC in Reset for 100µs
After Clock Startup
♦ ±10mA Clock Output Drive Capability
♦ 2% Initial Accuracy
Unlike typical crystal and ceramic resonator oscillator
circuits, the MAX7376 is resistant to vibration and EMI.
The high-output-drive current and absence of high-
impedance nodes make the oscillator less susceptible
to dirty or humid operating conditions. With a wide
operating temperature range as standard, the MAX7376
is a good choice for demanding home appliance,
industrial, and automotive environments.
♦ ±50ppm/°C Temperature Coefficient
♦ 50% Duty Cycle
♦ 5ns Output Rise and Fall Time
♦ Low Jitter: 160psP-P at 8MHz (No PLL)
)
♦ 3mA Operating Current (8MHz)
♦ 13µA Operating Current (32kHz)
♦ -40°C to +125°C Temperature Range
The MAX7376 is available in factory-programmed fre-
quencies from 32.768kHz to 10MHz. See Table 2 for
standard frequencies and contact the factory for cus-
tom frequencies.
Ordering Information
The MAX7376 is available in a 5-pin SOT23 package.
Refer to the MAX7382 data sheet for frequencies
≥10MHz. The MAX7376 standard operating tempera-
ture range is -40°C to +125°C. See the Applications
Information section for the extended operating temper-
ature range.
PIN-
RESET
PART
TEMP RANGE
PACKAGE OUTPUT
MAX7376C_ _ _-T -40°C to +125°C 5 SOT23-5 Open drain
Active high
MAX7376A_ _ _-T -40°C to +125°C 5 SOT23-5
push-pull
Active low
MAX7376B_ _ _-T -40°C to +125°C 5 SOT23-5
push-pull
Applications
White Goods
Standard version is shown in bold.
Automotive
The first letter after the part number designates the reset output
option. Insert the letter corresponding to the desired reset
threshold level from Table 1 in the next position. Insert the two-
letter code from Table 2 in the remaining two positions for the
desired frequency range. See Table 3 for standard part numbers.
Consumer Products
Appliances and Controls
Handheld Products
Portable Equipment
Microcontroller (µC) Systems
Pin Configuration
TOP VIEW
CLOCK
GND
1
2
3
5
E.C.
Typical Application Circuit appears at end of data sheet.
MAX7376
RST/RST
4
V
CC
SOT23
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.