19-1889; Rev 3; 3/04
150mA, SOT23, Low-Dropout Linear Regulators
with Internal Microprocessor Reset Circuit
General Description
Features
The MAX6329/MAX6349 are low-dropout, micropower
linear voltage regulators with integrated microproces-
sor reset circuits. Each is available with preset +3.3V,
+2.5V, +1.8V, or adjustable output voltages and can
deliver up to 150mA load current. Employing internal P-
channel MOSFET pass transistors, the devices con-
sume only 25µA supply current, independent of the
device load. The low supply current, low dropout volt-
age, and integrated reset functionality make these
devices ideal for battery powered portable equipment.
ꢀ Preset +3.3V/+2.5V/+1.8V or Adjustable Regulator
Output
ꢀ
3.ꢀ0 Regulator Aꢁꢁuraꢁc Oꢂer tꢃe ꢄpeꢁꢅied
Operatꢅng Range
ꢀ 25µA ꢄupplc Current
ꢀ Low 18ꢀmV Dropout at 1ꢀꢀmA Load
ꢀ ꢄmall Output Capaꢁꢅtor (1µF mꢅn ꢁeramꢅꢁ or
tantalum)
The MAX6329/MAX6349 include an internal reset circuit
that indicates when the regulator output drops below
standard microprocessor supply tolerances (-5% or
-10%). The reset output remains asserted for 100ms
(min) after the regulator output exceeds the selected
reset threshold, ensuring that supply voltages and clock
oscillators have stabilized before processor activity is
enabled. Reset outputs are available in push-pull (active-
low or -high) and open-drain (active-low) options. The
internal reset circuit replaces external microprocessor
supervisors or RC-based reset time delays.
ꢀ Zero Reꢂerse Leakage Current
ꢀ Tꢃermal and ꢄꢃort-Cꢅrꢁuꢅt Proteꢁtꢅon
ꢀ Integrated Mꢅꢁroproꢁessor Reset Cꢅrꢁuꢅt wꢅtꢃ
1ꢀꢀms (mꢅn) Tꢅmeout
ꢀ Open-Draꢅn and Pusꢃ-Pull Reset Outputs
ꢀ Regulator ꢄꢃutdown Input (MAX6329) or Manual
Reset Input (MAX6349)
ꢀ 6-Pꢅn ꢄOT23 Paꢁkage
The MAX6329/MAX6349 are optimized for use with a
1µF (min) output capacitor. The regulator output volt-
age is adjustable with an external resistor-divider net-
work at SET (reset threshold voltages track the desired
output voltage). Each device includes thermal shut-
down protection, output short-circuit protection, and
reverse leakage protection. The MAX6329 includes a
shutdown feature to reduce regulator current below
1µA (max) and the MAX6349 offers a manual reset
input to assert a microprocessor reset while the regula-
tor output is within specification.
Ordering Information
PIN-
PACKAGE
PART
TEMP RANGE
MAX6329_ _ UT-T
MAX6349_ _ UT-T
0°C to +85°C
0°C to +85°C
6 SOT23-6
6 SOT23-6
These parts offer a choice of regulator/reset voltages and reset
outputs. From the Selector Guide, insert the desired suffix let-
ters into the blanks to complete the part number. Each device
is available in nine standard versions. Sample stock is general-
ly held on standard versions only (see Standard Versions
table). Standard versions have an order increment requirement
of 2500 pieces. Nonstandard versions have an order increment
requirement of 10,000 pieces. Contact factory for availability of
nonstandard versions.
________________________Applications
Hand-Held Instruments
Electronic Planners
Palm Top Computers
PCMCIA Cards
Pin Configuration
USB Devices
TOP VIEW
Cellular Telephones
Cordless Telephones
Modems
IN
GND
1
2
3
6
5
4
OUT
MAX6329/
MAX6349
SET
Selector Guide appears at end of data sheet.
(MR) SHDN
RESET/RESET
Typical Operating Circuit appears at end of data sheet.
ꢄOT23-6
( ) ARE FOR MAX6349 ONLY.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.