5秒后页面跳转
MAX5580AETP PDF预览

MAX5580AETP

更新时间: 2024-11-08 22:55:19
品牌 Logo 应用领域
美信 - MAXIM /
页数 文件大小 规格书
34页 1201K
描述
Buffered, Fast-Settling, Quad, 12-/10-/8-Bit, Voltage-Output DACs

MAX5580AETP 技术参数

是否无铅: 含铅是否Rohs认证: 不符合
生命周期:Obsolete零件包装代码:QFN
包装说明:HVQCCN, LCC20,.20SQ,25针数:20
Reach Compliance Code:not_compliant风险等级:5.34
最大模拟输出电压:5.25 V最小模拟输出电压:
转换器类型:D/A CONVERTER输入位码:BINARY
输入格式:SERIALJESD-30 代码:S-XQCC-N20
JESD-609代码:e0长度:5 mm
最大线性误差 (EL):0.0244%湿度敏感等级:1
位数:12功能数量:1
端子数量:20最高工作温度:85 °C
最低工作温度:-40 °C封装主体材料:UNSPECIFIED
封装代码:HVQCCN封装等效代码:LCC20,.20SQ,25
封装形状:SQUARE封装形式:CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
峰值回流温度(摄氏度):245电源:2/5,3/5 V
认证状态:Not Qualified座面最大高度:0.8 mm
最大稳定时间:6 µs标称安定时间 (tstl):3 µs
子类别:Other Converters最大压摆率:4 mA
标称供电电压:5 V表面贴装:YES
技术:BICMOS温度等级:INDUSTRIAL
端子面层:Tin/Lead (Sn85Pb15)端子形式:NO LEAD
端子节距:0.65 mm端子位置:QUAD
处于峰值回流温度下的最长时间:NOT SPECIFIED宽度:5 mm
Base Number Matches:1

MAX5580AETP 数据手册

 浏览型号MAX5580AETP的Datasheet PDF文件第2页浏览型号MAX5580AETP的Datasheet PDF文件第3页浏览型号MAX5580AETP的Datasheet PDF文件第4页浏览型号MAX5580AETP的Datasheet PDF文件第5页浏览型号MAX5580AETP的Datasheet PDF文件第6页浏览型号MAX5580AETP的Datasheet PDF文件第7页 
19-3164; Rev 1; 5/04  
Buffered, Fast-Settling, Quad,  
12-/10-/8-Bit, Voltage-Output DACs  
General Description  
Features  
3µs (max) 12-Bit Settling Time to 0.5 LSB  
The MAX5580–MAX5585 quad, 12-/10-/8-bit, voltage-  
output, digital-to-analog converters (DACs) offer  
buffered outputs and a 3µs maximum settling time at the  
12-bit level. The DACs operate from a +2.7V to +5.25V  
analog supply and a separate +1.8V to +5.25V digital  
supply. The 20MHz, 3-wire, serial interface is compati-  
ble with SPI™, QSPI™, MICROWIRE™, and digital sig-  
nal processor (DSP) protocol applications. Multiple  
devices can share a common serial interface in direct-  
access or daisy-chained configuration. The MAX5580–  
MAX5585 provide two multifunctional, user-programma-  
ble, digital I/O ports. The externally selectable power-up  
states of the DAC outputs are either zero scale, mid-  
scale, or full scale. Software-selectable FAST and SLOW  
settling modes decrease settling time in FAST mode, or  
reduce supply current in SLOW mode.  
Quad, 12-/10-/8-Bit Serial DACs in TSSOP and  
Thin QFN (5mm x 5mm x 0.8mm) Packages  
±1 LSB (max) INL and DNL at 12-Bit Resolution  
Two User-Programmable Digital I/O Ports  
Single +2.7V to +5.25V Analog Supply  
+1.8V to AV  
Digital Supply  
DD  
20MHz, 3-Wire, SPI-/QSPI-/MICROWIRE-/DSP-  
Compatible Serial Interface  
Glitch-Free Outputs Power Up to Zero Scale,  
Midscale, or Full Scale Controlled by PU Pin  
Unity-Gain or Force-Sense-Configured  
Output Buffers  
Ordering Information  
The MAX5580/MAX5581 are 12-bit DACs, the  
MAX5582/MAX5583 are 10-bit DACs, and the  
MAX5584/MAX5585 are 8-bit DACs. The MAX5580/  
MAX5582/MAX5584 provide unity-gain-configured out-  
put buffers, while the MAX5581/MAX5583/MAX5585  
provide force-sense-configured output buffers. The  
MAX5580–MAX5585 operate over the extended -40°C  
to +85°C temperature range and are available in  
space-saving, 5mm x 5mm x 0.8mm, 20-pin, thin QFN  
and TSSOP packages.  
PART  
TEMP RANGE  
-40°C to +85°C  
-40°C to +85°C  
PIN-PACKAGE  
20 TSSOP-EP**  
20 Thin QFN-EP**  
MAX5580AEUP*  
MAX5580AETP*  
*Future product—contact factory for availability. Specifications  
are preliminary.  
**EP = Exposed paddle.  
Ordering Information continued at end of data sheet.  
Selector Guide  
Applications  
Portable Instrumentation  
INL  
(LSB  
max)  
OUTPUT BUFFER RESOLUTION  
PART  
CONFIGURATION  
(BITS)  
Automatic Test Equipment (ATE)  
Digital Offset and Gain Adjustment  
Automatic Tuning  
MAX5580AEUP  
MAX5580AETP  
MAX5580BEUP  
MAX5580BETP  
MAX5581AEUP  
MAX5581AETP  
MAX5581BEUP  
MAX5581BETP  
MAX5582EUP  
MAX5582ETP  
MAX5583EUP  
MAX5583ETP  
MAX5584EUP  
MAX5584ETP  
MAX5585EUP  
MAX5585ETP  
Unity gain  
Unity gain  
12  
12  
12  
12  
12  
12  
12  
12  
10  
10  
10  
10  
8
1
1
Unity gain  
4
Programmable Voltage and Current Sources  
Programmable Attenuators  
Unity gain  
4
Force sense  
Force sense  
Force sense  
Force sense  
Unity gain  
1
Industrial Process Controls  
1
Motion Control  
4
Microprocessor (µP)-Controlled Systems  
Power Amplifier Control  
4
1
Fast Parallel-DAC to Serial-DAC Upgrades  
Unity gain  
1
Force sense  
Force sense  
Unity gain  
1
1
0.5  
0.5  
0.5  
0.5  
Pin Configurations appear at end of data sheet.  
Unity gain  
8
Force sense  
Force sense  
8
8
SPI/QSPI are trademarks of Motorola, Inc.  
MICROWIRE is a trademark of National Semiconductor Corp.  
________________________________________________________________ Maxim Integrated Products  
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at  
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.  

与MAX5580AETP相关器件

型号 品牌 获取价格 描述 数据表
MAX5580AETP+ MAXIM

获取价格

D/A Converter, 1 Func, Serial Input Loading, 3us Settling Time, 5 X 5 MM, 0.80 MM HEIGHT,
MAX5580AETP-T MAXIM

获取价格

D/A Converter, 1 Func, Serial Input Loading, 3us Settling Time, 5 X5 MM, 0.80 MM HEIGHT, M
MAX5580AEUP MAXIM

获取价格

Buffered, Fast-Settling, Quad, 12-/10-/8-Bit, Voltage-Output DACs
MAX5580AEUP+T MAXIM

获取价格

暂无描述
MAX5580AEUP-T MAXIM

获取价格

D/A Converter, 1 Func, Serial Input Loading, 3us Settling Time, PDSO20, 4.40 MM, MO-153ACT
MAX5580BETP MAXIM

获取价格

Buffered, Fast-Settling, Quad, 12-/10-/8-Bit, Voltage-Output DACs
MAX5580BETP-T MAXIM

获取价格

D/A Converter, 1 Func, Serial Input Loading, 3us Settling Time, 5 X 5 MM, 0.80 MM HEIGHT,
MAX5580BEUP MAXIM

获取价格

Buffered, Fast-Settling, Quad, 12-/10-/8-Bit, Voltage-Output DACs
MAX5580BEUP+ MAXIM

获取价格

D/A Converter, 1 Func, Serial Input Loading, 3us Settling Time, PDSO20, 4.4 MM, ROHS COMPL
MAX5580BEUP+T MAXIM

获取价格

D/A Converter, 1 Func, Serial Input Loading, 3us Settling Time, PDSO20, 4.4 MM, ROHS COMPL