19-3672; Rev 0; 5/05
50mA/100mA Current-Limit Switches with
NO-LOAD Flag in µDFN
General Description
Features
♦ Guaranteed Current Limit: 50mA, 100mA
♦ Thermal Shutdown Protection
♦ Reverse-Current Protection
♦ 0.7Ω On-Resistance (MAX4826–MAX4831)
♦ 14ms Guaranteed Blanking Time
♦ Fault Flag (FFLG)
The MAX4826–MAX4831 family of switches has internal
current limiting to prevent host devices from being
damaged due to faulty load conditions. These analog
switches have a low 0.7Ω on-resistance and operate
from a +2.3V to +5.5V input voltage range. These
devices are available with guaranteed 50mA and
100mA current limits, making them ideal for load-
switching applications. In addition to the current-limit
fault flag (FFLG), an open-drain no-load flag indicator
(NOLD) notifies the system when the current through
the switch is less than 10mA (MAX4826–MAX4829), or
5mA (MAX4830/MAX4831).
♦ No-Load Flag (NOLD)
♦ 65µA Supply Current
When the switch is on and a load is connected to the
port, a guaranteed blanking time of 14ms ensures that
the transient voltages settle down. If, after this blanking
time, the load current is greater than the current limit,
the MAX4826/MAX4828/MAX4830 enter a latch-off state
where the switch is turned off, and FFLG is issued to
the microprocessor. The switch can be turned on again
by cycling the power or ON.
♦ 8µA Latch-Off Current
♦ 0.01µA Shutdown Current
♦ +2.3V to +5.5V Supply Range
♦ Undervoltage Lockout
♦ Fast Current-Limit Response Time
♦ 6-Pin µDFN Package (1mm x 1.5mm)
The MAX4827/MAX4829/MAX4831 have an autoretry
feature where the switch turns off after the blanking
time, and then continuously checks to see if the over-
load condition is present. The current-limit fault flag
(FFLG) is issued and remains low until after the fault
condition is removed. The switch remains on after the
overload condition disappears.
Applications
GPS Systems
Cell Phones
Digital Still Cameras
The MAX4826–MAX4831 operate over the extended
-40°C to +85°C temperature range, and are available in a
tiny space-saving, 1mm x 1.5mm, 6-pin µDFN package.
PDAs and Palmtop Devices
MP3 Players
Ordering Information/Selector Guide
MIN FULL-
PIN-
PACKAGE
MAX NO-
LOAD LIMIT
(mA)
ON-RESISTANCE
TOP
MARK
PKG
CODE
PART
LOAD LIMIT
(mA)
(Ω)
MODE
T
= +25°C
A
MAX4826ELT
MAX4827ELT*
MAX4828ELT*
MAX4829ELT
MAX4830ELT
MAX4831ELT*
6 µDFN
6 µDFN
6 µDFN
6 µDFN
6 µDFN
6 µDFN
50
50
10
10
10
10
5
1
1
1
1
2
2
Latch Off
Autoretry
Latch Off
Autoretry
Latch Off
Autoretry
AK
AL
L611-1
L611-1
L611-1
L611-1
L611-1
L611-1
100
100
50
AM
AN
AO
AP
50
5
Note: All devices operate over the -40°C to +85°C operating range.
*Future product—contact factory for availability.
Pin Configuration appears at end of data sheet.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.