Design
Tools
Support
Resources
and Models
Click here to ask an associate for production status of specific part numbers.
Ultra-Small, Low-Cost, 85MHz Op Amps with
Rail-to-Rail Outputs and Disable
MAX4389/MAX4390/
MAX4392–MAX4396
General Description
Features
● Low Cost
● High Speed
The MAX4389/MAX4390/MAX4392–MAX4396 family of
op amps are unity-gain stable devices that combine high-
speed performance, rail-to-rail outputs, and disable mode.
These devices are targeted for applications where an
input or an output is exposed to the outside world, such
as video and communications.
• 85MHz -3dB Bandwidth
• 27MHz 0.1dB Gain Flatness
• 500V/μs Slew Rate
●
Single 4.5V to 11V or Dual ±2.25V to ±5.5V Operation
The MAX4389/MAX4390/MAX4392–MAX4396 operate
from a single 4.5V to 11V supply or from dual ±2.25V to
±5.5V supplies. The common-mode input voltage range
extends to the negative power-supply rail (ground in
single-supply applications). The MAX4389/MAX4390/
MAX4392–MAX4396 consume only 5.5mA of quiescent
supply current per amplifier while achieving a 85MHz
-3dB bandwidth, 27MHz 0.1dB gain flatness, and a
500V/μs slew rate. Disable mode sets the outputs to high
impedance while consuming only 450μA of current.
● Rail-to-Rail Outputs
● Input Common-Mode Range Extends to V
EE
● Low Differential Gain/Phase: 0.015%/0.015°
● Low Distortion at 5MHz
• -59dBc Spurious-Free Dynamic Range
● High Output Drive: ±50mA
● 450μA Disable Capability
(MAX4389/MAX4393/MAX4394/MAX4396)
®
● Space-Saving SC70, SOT23, μMAX , or TSSOP
Packages
The MAX4389 single, MAX4393 dual, MAX4394 triple,
and MAX4396 quad include disable capabilities. The
MAX4389 and MAX4390 are available in ultra-small, 6-pin
SC70 packages.
Ordering Information
PIN-
TOP
MARK
PART
TEMP RANGE
PACKAGE
Applications
● Set-Top Boxes
● Surveillance Video Systems
● Analog-to-Digital Converter Interface
● CCD Imaging Systems
● Digital Cameras
MAX4389EXT+T
MAX4389EUT+T
MAX4390EXT+T
MAX4390EUK+T
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
6 SC70
6 SOT23
6 SC70
5 SOT23
ABF
ABDC
ABE
ADZM
+Denotes a lead(Pb)-free/RoHs-compliant package.
T = Tape and reel.
● Video-on-Demand
● Video Line Driver
Ordering Information continued at end of data sheet.
Selector Guide appears at end of data sheet.
µMAX is a registered trademark of Maxim Integrated Products, Inc.
Typical Operating Circuit
Pin Configurations
DISABLE
TOP VIEW
+
IN
OUT
1
2
3
6
5
4
V
CC
75Ω
OUT
Z
o
= 75Ω
MAX4389
MAX4389
V
EE
DISABLE
75Ω
IN+
IN-
200Ω
200Ω
SC70/SOT23
Pin Configurations continued at end of data sheet.
VIDEO LINE DRIVER
19-2322; Rev 8; 1/22
©
2021 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.
One Analog Way, Wilmington, MA 01887 U.S.A. Tel: 781.329.4700 © 2021 Analog Devices, Inc. All rights reserved.
|
|