Datasheet > MAX40004

MAX40004

更新时间： 2024-11-30 02:49:31

品牌	Logo	应用领域
美信 - MAXIM		/
页数	文件大小	规格书
6页	632K
描述
0.1V to 5.5V Input Voltage Range

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

MAX40004 数据手册

Evaluates: MAX40002–MAX40005

MAX40012–MAX40015

MAX40002–MAX40005

Evaluation Kits

General Description

Quick Start

The MAX40002–MAX40005 evaluation kits (EV kits) are

fully assembled and tested PC boards that evaluate

Required Equipment

Before beginning, the following equipment is needed:

the

comparators. The MAX40002ANS02–MAX40005ANS02

operate from a V supply between 1.7V to 5.5V, come

MAX40002ANS02–MAX40005ANS02

single

●

Three +5V DC power supplies (V /REF, IN, and V

)

One digital multimeter (DMM)

with an internal reference voltage of 0.2V, and have a

wide 0.1V to 5.5V input voltage (IN) range. These EV kits

demonstrate the MAX40002ANS02–MAX40005ANS02 in

an ultra-small, 0.76mm x 0.76mm, 4-bump wafer-level

package (WLP) with 0.35mm bump spacing.

Procedure

The MAX40002–MAX40005 EV kits are fully assembled

andtested. Followthesestepstoverifyboardoperation. Do

not turn on the power supply until all connections are

completed.

These EV kits are conﬁgured to evaluate all devices in

the MAX40002–MAX40005/MAX40012–MAX40015 family

that have a 4-bump wafer-level package (WLP). To evalu-

ate other WLP devices in this MAX40002–MAX40005/

MAX40012–MAX40015 family other than what is pre-

installed, replace the U1 IC with the desired part (see

Ordering Information for details).

1) Connect the positive terminal of a DC power supply to

the V

pad and the ground terminal to the GND pad.

2) Connect the positive terminal of a DC power supply to

the V pad and the ground terminal to the GND pad

(MAX40002/MAX40003/MAX40012/MAX40013 only).

3) Connect the positive terminal of a DC power supply to

the IN pad and the ground terminal to the GND pad.

4) Turn on the V

desired level.

Features

● 0.1V to 5.5V Input Voltage Range

power supply and set it to the

5) Turn on the V

power supply and set it to the

● 1.7V to 5.5V External Reference Range

desired level (MAX40002/MAX40003/MAX40012/

MAX40013 only).

6) Turn on the IN power supply and set it to the

desired level.

7) Monitor the output using a DMM at the OUT pad,

and study its response to varying voltage at IN (see

Table 1 for more information).

(MAX40002ANS─MAX40005ANS)

● 1.7V to 5.5V V

Range with Internal Reference

(MAX40002ANS_ _─MAX40005ANS_ _)

• 0.2V, 0.5V, 0.9V, and 1.222V Internal Reference

Options Available

● Evaluates 4-Bump WLP Package

● Fully Assembled and Tested

Ordering Information appears at the end of the data sheet.

19-8554; Rev 1; 2/20

12 3 4 5 6

中文翻译

下载PDF

与MAX40004相关器件

型号	品牌	获取价格	描述	数据表
MAX40004ANS02+	MAXIM	获取价格	IC COMPARATOR .2V 4WLP
MAX40005	MAXIM	获取价格	0.1V to 5.5V Input Voltage Range
MAX40005	ADI	获取价格	nanoPower 4-Bump Comparator in Ultra-Tiny 0.73mm x 0.73mm WLP/SOT23 Packages
MAX40005ANS02+	MAXIM	获取价格	IC COMP NANO .2V WLP-4
MAX40006	MAXIM	获取价格	Micropower, Rail-to-Rail, 300kHz Op Amp with Shutdown in a Tiny, 6-Bump WLP
MAX40006	ADI	获取价格	Micropower, Rail-to-Rail, 300kHz Op Amp with Shutdown in a Tiny, 6-Bump WLP
MAX40006ANT+	MAXIM	获取价格	Micropower, Rail-to-Rail, 300kHz Op Amp with Shutdown in a Tiny, 6-Bump WLP
MAX40006AVT+*	MAXIM	获取价格	Micropower, Rail-to-Rail, 300kHz Op Amp with Shutdown in a Tiny, 6-Bump WLP
MAX40007	ADI	获取价格	nanoPower Op Amp in Ultra-Tiny WLP and SOT23 Packages
MAX40008	MAXIM	获取价格	300ns Propagation Delay

与MAX40004相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

49
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

38
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

67
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

62

产品中心

服务支持

精选活动

关于我们

帮助中心

MAX40004

MAX40004 数据手册

与MAX40004相关器件

与MAX40004相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

MAX40004

MAX40004 数据手册

与MAX40004相关器件

与MAX40004相关文章

您还可以找

您在本页遇到什么问题？