Click here to ask an associate for production status of specific part numbers.
Automotive 4-Channel TFT-LCD Power Supply
with VCOM Buffer and ASIL B Features
MAX25222/MAX25222C
General Description
Benefits and Features
The MAX25222/MAX25222C are 4-channel TFT-LCD
● High Integration
power ICs that provide symmetrical positive AVDD and
• Synchronous Boost Provides AVDD of 4.2V to
10.5V at up to 200mA
negative NAVDD supplies as well as VG
and VG
OFF
ON
gate supplies. In addition, a VCOM buffer with output volt-
age range above and below ground and a temperature
measurement block are integrated.
• NAVDD Inverter Output at up to -200mA
• 15mA VG
Output (7.6V to 20.2V) from 3x
ON
Regulated Charge Pump
• VG
(-18.2V to -5.6V) from Regulated Charge
OFF
These devices contain non-volatile memory so that the
values of all outputs can be calibrated for the lifetime of
the device (maximum five times).
Pump at up to -15mA (Charge-Pump Doubler)
• Controlled Sequencing during Power-On and
Power-Off of All Rails
• VCOM Output Range +1V to -2.49V in 6.83mV
Steps
• NTC Input for Temperature Measurement/
Compensation
2
Programming is carried out using the built-in I C interface,
which can also be used to read back diagnostic informa-
tion. A stand-alone mode is available after the device has
been programmed.
The temperature sensor interface block measures the
temperature optionally allowing the VCOM output voltage
to be adjusted depending on the measured temperature.
● Low EMI
• 420kHz/2.1MHz Switching Frequency with Spread
Spectrum
The MAX25222/MAX25222C include extensive diagnos-
tics to aid in fulfilling the ASIL B safety level.
2
● I C Control/Diagnostic Interface with FLTB (Interrupt)
Output
The MAX25222/MAX25222C are available in a TQFN
package and operate in the -40°C to 125°C temperature
range.
• UV Diagnostics on All Outputs
• OV Diagnostics on All Outputs
• Bandgap Reference Out of Range
• Stuck FLTB Pin
• Communication Parity Check
• VCOM DAC Fault
Applications
● Infotainment Displays
● Central Information Displays
● Instrument Clusters
● Versatile
• Non-Volatile Output Voltage Settings on AVDD/
NAVDD, VG , VG
, VCOM, and Sequencing
ON
OFF
• Supports Stand-Alone Operation Mode after
Programming
• Compact 5mm x 5mm TQFN32 Package
● AEC-Q100 Grade 1
Ordering Information appears at end of data sheet.
19-100888; Rev 1; 10/21
© 2021 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.
One Analog Way, Wilmington, MA 01887 U.S.A. | Tel: 781.329.4700 | © 2021 Analog Devices, Inc. All rights reserved.