19-5931; Rev 0; 6/11
ABRIDGED DATA SHEET
MAX24288
IEEE 1588 Packet Timestamper and Clock
and 1Gbps Parallel-to-Serial MII Converter
General Description
Highlighted Features
♦
♦
♦
♦
Complete Hardware Support for IEEE 1588
Ordinary, Boundary, and Transparent Clocks
Flexible Block for Any 1588 Architecture
1588 Clock Hardware
The MAX24288 is a flexible, low-cost IEEE 1588
clock and timestamper with an SGMII or 1000BASE-X
serial interface and a parallel MII interface that can
be configured for GMII, RGMII, or 10/100 MII. The
device provides all required hardware support for
high-accuracy time and frequency synchronization
using the IEEE1588 Precision Time Protocol. In both
the transmit and receive directions 1588 packets are
identified and timestamped with high precision.
System software makes use of these timestamps to
determine the time offset between the system and its
timing master. Software can then correct any time
error by steering the device’s 1588 clock subsystem
appropriately. The device provides the necessary I/O
to time-synchronize with a 1588 master elsewhere in
the same system or to be the master to which slave
components can synchronize.
♦
♦
♦
Steerable by Software with 2-8ns Time
Resolution and 2-32ns Period Resolution
1ns Input Timestamp Accuracy and Output
Edge Placement Accuracy
Three Time/Frequency Controls: Direct Time
Write, Time Adjustment, and High-Resolution
Frequency Adjustment
♦
♦
Programmable Clock and Time-Alignment I/O
Input Event Timestamper Detects Incoming
Time Alignment (e.g., 1 PPS) or Clock Edges
♦
♦
Output Event Generator Provides Output Clock
Signal or Time Alignment Signal
Built-In Support for Telecom Equipment Timing
Architecture with Dual Redundant Timing Cards
In addition, the MAX24288 is a full-featured, gigabit
parallel-to-serial MII converter. It provides full SGMII
revision 1.8 compliance and also interfaces directly to
1Gbps 1000BASE-X SFP optical modules.
♦
1588 Timestamping Hardware
♦
1588 v1 and v2 Packets, Transmit and Receive
♦
Packet Classifier Supports 1588 Over Ethernet,
IPv4/UDP, IPv6/UDP, or MPLS and Is
Programmable for More Complex Stacks
Applications
1588-Enabled Equipment with 1G Ethernet Ports
Wireless Base Stations and Controllers
Switches, Routers, DSLAMs, PON Equipment
Pseudowire Circuit Emulation Equipment
Test and Measurement Systems
♦
♦
Supports 802.1Q VLAN Tags and MAC-in-MAC
One-Step Operation: On-the-Fly Timestamp
Insertion or Transparent Clock Corrections; No
Need for Follow-Up Packets
Industrial and Factory Automation Equipment
Medical Equipment
♦
♦
Can Insert All Timestamps, Receive and
Transmit, Into Packets for Easy Software Access
Optional Two-Step Operation
♦
Parallel-to-Serial MII Conversion
Ordering Information
♦
♦
♦
♦
Bidirectional Wire-Speed Interface Conversion
Serial: 1000BASE-X or SGMII v1.8 (4, 6, or 8 Pin)
Parallel: GMII, RGMII, or 10/100 MII
Translates Link Speed and Duplex Mode
Negotiation Between MDIO and SGMII PCS
PART
TEMP RANGE
PIN-PACKAGE
MAX24288ETK+
68 TQFN-EP*
-40°C to +85°C
+Denotes a lead(Pb)-free/RoHS-compliant package.
*EP = Exposed pad.
SPI is a trademark of Motorola, Inc.
♦
♦
♦
Full Support for 1588 + Synchronous Ethernet
MDIO and SPI™ Interfaces
1.2V Operation with 3.3V I/O
_________________________________________________________Maxim Integrated Products
1
Some revisions of this device may incorporate deviations from published specifications known as errata. Multiple
revisions of any device may be simultaneously available through various sales channels. For information about device
errata, go to: www.maxim-ic.com/errata. For pricing, delivery, and ordering information, please contact Maxim Direct at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
5秒后页面跳转
解析光耦仿真器：升级光耦合器技术的必要性
英伟达新一代Blackwell GPU过热问题致交付延迟
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
