5秒后页面跳转
MAX22005_V01 PDF预览

MAX22005_V01

更新时间: 2024-11-17 02:52:31
品牌 Logo 应用领域
美信 - MAXIM /
页数 文件大小 规格书
47页 1216K
描述
12-Channel Factory-Calibrated Configurable Industrial-Analog Input

MAX22005_V01 数据手册

 浏览型号MAX22005_V01的Datasheet PDF文件第2页浏览型号MAX22005_V01的Datasheet PDF文件第3页浏览型号MAX22005_V01的Datasheet PDF文件第4页浏览型号MAX22005_V01的Datasheet PDF文件第5页浏览型号MAX22005_V01的Datasheet PDF文件第6页浏览型号MAX22005_V01的Datasheet PDF文件第7页 
EVALUATION KIT AVAILABLE  
Click here to ask about the production status of specific part numbers.  
MAX22005  
12-Channel Factory-Calibrated  
Configurable Industrial-Analog Input  
General Description  
Benefits and Features  
The MAX22005 is a twelve-channel industrial-grade ana-  
log input voltage-mode device that can also be configured  
as analog-input current-mode device using an external  
precision resistor per channel. It can also operate as con-  
figurable analog-input using an external precision resistor  
and low-cost switch per channel. Input channels can be  
used as twelve single-ended inputs, or six differential in-  
puts, or up to eight multichannel configurable differential  
inputs. In total, the device supports up to 26 different con-  
figurations.  
● Enables More Robust and Reliable Systems  
• ±36V High-Voltage Protection for All Input Ports  
• 2kV HBM ESD Protection of All Pins  
• ±2kV Surge Protection (with External 5kΩ Resistor)  
• CRC Detection for Robust Serial Communication  
• Watchdog Timer  
● Software Configurability  
• ±12.5V Analog Input-Voltage Mode  
• ±25mA Analog Input-Current Mode Using External  
Sense Resistor  
The MAX22005 features an integrated 24-bit delta-sigma  
ADC that is shared between all channels. The ADC can  
be used with either an integrated 5ppm/°C precision refer-  
ence or an external reference. Standard industrial analog  
input voltage ranges are converted to the ADC input volt-  
age range using high-voltage, zero-drift input amplifiers.  
All input ports are robustly protected up to ±36V reverse  
polarity and ±2kV surge pulses without the need of TVS  
diodes.  
• Configurable Inputs Using External Sense Resistor  
and Low-Cost Switches  
● Best-in-Class System Accuracy  
• 0.02% FSR at 25°C Factory Calibrated  
• 0.05% FSR over ±50°C from 25°C Factory  
Calibration  
• Maximum of 30nA Input Leakage  
• 5ppm/°C Internal Reference  
● Additional Features  
Eight general-purpose digital I/O (GPIO) ports are avail-  
able for common use, or they can be used to control ex-  
ternal switches for configurable inputs.  
• Internal or External ADC Reference  
• Eight GPIO Ports  
• 48.5mW Low Power Dissipation with ±5V Supply  
• 30MHz SPI/QSPI/DSP-Compatible Serial Interface  
The MAX22005 is factory calibrated with best-in-class sys-  
tem performance of less than 0.05% FSR Total-Unadjust-  
ed-Error (TUE) over temperature.  
● Operating Temperature -40°C to +125°C  
● 7.5mm × 7mm 48-pin LGA package  
The host communicates with the MAX22005 through a  
high-speed 30MHz SPI bus for all configurations and infor-  
mation management, as well as for acquiring conversion  
results. An optional 8-bit CRC enhances the reliability of  
the SPI interface, protecting against all 8-bit bursts, as well  
as all double-bit errors.  
Ordering Information appear at end of datasheet.  
The MAX22005 operates from 2.7V to 3.6V analog and  
digital supplies, and up to ±24V high-voltage supplies.  
The MAX22005 is available in 48-pin LGA package and  
operates over the -40°C to +125°C industrial temperature  
range.  
Applications  
● Programmable Logic Controllers (PLC)  
● Programmable Automation Controllers (PAC)  
● Distributed Control Systems (DCS)  
19-101026; Rev 0; 4/21  
 
 

与MAX22005_V01相关器件

型号 品牌 获取价格 描述 数据表
MAX22005ALM+ MAXIM

获取价格

12-Channel Factory-Calibrated Configurable Industrial-Analog Input
MAX22005ALM+T MAXIM

获取价格

12-Channel Factory-Calibrated Configurable Industrial-Analog Input
MAX22005EVKIT MAXIM

获取价格

Access to Eight GPIO Channels
MAX22007 ADI

获取价格

集成基准电压源的四通道12位可配置模拟输出器件
MAX2202 MAXIM

获取价格

RMS Power Detector
MAX22025 ADI

获取价格

小尺寸、隔离型、半双工RS-485/RS-422收发器,带有AutoDirection (
MAX22025F ADI

获取价格

小尺寸、隔离型、半双工RS-485/RS-422收发器,带有AutoDirection (
MAX22026 ADI

获取价格

小尺寸、隔离型、半双工RS-485/RS-422收发器,带有AutoDirection (
MAX22026F ADI

获取价格

小尺寸、隔离型、半双工RS-485/RS-422收发器,带有AutoDirection (
MAX22027 ADI

获取价格

小尺寸、隔离型、半双工RS-485/RS-422收发器,带有AutoDirection (