19-5496; Rev 1; 2/11
RMS Power Detector
MAX02
General Description
Features
♦ -29dBm to 0dBm Power-Detection Range
♦ 33mV/dB (typ) Log Detector
The MAX2202 RMS power detector is designed to
operate from 800MHz to 2.0GHz. The device is ideal for
wideband code-division multiple access (WCDMA),
®
cdma2000 , and high-speed downlink/uplink packet
♦ 0.1dB (typ) RMS Accuracy from WCDMA
access. The device accepts an RF signal at the input
and outputs the same voltage regardless of the peak-
average of the input signal. The output voltage and
input power is linear in dB. The device has a
-29dBm to 0dBm detection range, and every dB
change in input power gives 33mV (typ) change in out-
put voltage.
Modulation Change
♦
0.ꢀdB Detection ꢁrror Due to ꢂemperature
♦ +2.5V to +ꢀ.2V Single-Supply Operation
♦ Space-Saving 6-Bump WLP Package
The device operates from a 2.5V to 4.2V supply and is
specified over the -40°C to +85°C extended tempera-
ture range. The device is available in a 6-bump WLP
package.
Ordering Information
PIN-
ꢂOP
PARꢂ
ꢂꢁMP RANGꢁ
PACKAGꢁ MARK
Applications
LTE, WCDMA, cdma2000, 1xEVDO
MAX2202EWT+T10 -40°C to +85°C
6 WLP AA
+Denotes a lead(Pb)-free/RoHS-compliant package.
T = Tape and reel.
High-Speed Downlink Packet Access (HSDPA)
High-Speed Uplink Packet Access (HSUPA)
Typical Operating Circuit
TERMINATION RESISTOR NOT NEEDED
IF TWO OR MORE DIRECTIONAL COUPLERS
ARE USED AND CONFIGURED AS IN FIGURE 1.
RF INPUT FROM
DIRECTIONAL
COUPLER
MAX2202
+
220pF
SMA
A1
A2
RFIN/
ENA
GND
50Ω
1%
24.3kΩ
B2
FILT
B1
GND
ENABLE
LOGIC INPUT
C1
0.1μF
MUST BE X5R
OR X7R TYPE
V
CC
TEST POINT
TYPE
C1 (μF)
0.1
C2 (nF)
4.7
10kΩ
C1
C2
OUT
TO ADC
C2
4700pF
WCDMA
NCDMA
V
CC
1μF
0.1μF
0.33
15
cdma2000 is a registered trademark of the Telecommunications Industry Association.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-ꢀ6ꢀ2,
or visit Maxim’s website at www.maxim-ic.com.