Datasheet > MAX20404

MAX20404

更新时间： 2024-11-07 02:52:23

品牌	Logo	应用领域
美信 - MAXIM		/
页数	文件大小	规格书
7页	561K
描述
Output Voltage: 3.3V/5V Fixed and Adjustable from 0.8 to 10V

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

MAX20404 数据手册

Click here for production status of speciﬁc part numbers.

Evaluates: MAX20404/MAX20405/

MAX20406

MAX20406 Evaluation Kit

General Description

Quick Start

The MAX20406 evaluation kit (EV kit) provides a proven

design to evaluate the MAX20406 automotive 2.1MHz

synchronous buck converter with 10µA quiescent current.

The standard EV kit PCB comes with a MAX20406AFOB/

VY+ (2.1MHz, 3.3V) installed, as well as various test

points and jumpers for evaluation. The EV kit output volt-

age is ﬁxed and easily conﬁgured with minimum compo-

nent changes. The default EV kit is designed to deliver

up to 6A with input voltage 3V to 36V. Output voltage

quality can be monitored by observing the PGOOD signal.

The MAX20406 EV kit can also be used to evaluate the

MAX20404 and MAX20405.

Required Equipment

● MAX20406 EV Kit

● 36V, 6A Power Supply (PS)

● Appropriate Resistive Load, or an Electronic Load

that can Sink 6A

● Digital Multimeter (DMM)

● Oscilloscope

Procedure

The EV kit comes fully assembled and tested. Follow the

steps below to verify board operation:

1) Verify that all jumpers are in their default positions, as

shown in Table 1.

Beneﬁts and Features

● Input Supply Range from 3V to 36V

2) Connectthepositiveandnegativeterminalsofthepow-

er supply to the VSUP_FILTER and GND test pads,

respectively.

● Output Voltage: 3.3V/5V Fixed and Adjustable from

0.8 to 10V

● Delivers up to 6A

3) Set the power-supply voltage to 14V and current limit

to 6A.

● Frequency - Synchronization Input

● Enable Input

4) Turn on the power supply.

● Spread Spectrum Available

● Voltage Monitoring PGOOD Output Available

● Proven PCB Layout

5) Using the DMM, verify the VOUT is approximately

3.3V.

6) Verify that the switching frequency is 2.1MHz

(approx.) by monitoring the inductor switching voltage

with the oscilloscope.

● Fully Assembled and Tested

Ordering Information appears at end of data sheet.

Additional Evaluation

7) Connect the positive and negative terminals of the

electronic load to VOUT and GND3, respectively.

8) Set the electronic load to the desired current at or

below 6A or use an equivalent resistive load with an

appropriate power rating.

9) Adjust current limit on the power supply as necessary.

10) Turn on the power supply and electronic load.

11) Verify that voltage across the VOUT and GND3 is 3.3V.

319-100435; Rev 3; 7/21

12 3 4 5 6 7

中文翻译

下载PDF

与MAX20404相关器件

型号	品牌	获取价格	描述	数据表
MAX20405	MAXIM	获取价格	Output Voltage: 3.3V/5V Fixed and Adjustable from 0.8 to 10V
MAX20405	ADI	获取价格	汽车级36V、4A/5A/6A完全集成式同步降压转换器
MAX20406	MAXIM	获取价格	Output Voltage: 3.3V/5V Fixed and Adjustable from 0.8 to 10V
MAX20406	ADI	获取价格	汽车级36V、4A/5A/6A完全集成式同步降压转换器
MAX20406EVKIT	MAXIM	获取价格	Output Voltage: 3.3V/5V Fixed and Adjustable from 0.8 to 10V
MAX20408	ADI	获取价格	具有10μA静态电流和双相能力的汽车级36V、8A/10A全集成降压转换器
MAX2041	MAXIM	获取价格	High-Linearity, 1700MHz to 3000MHz Upconversion / Downconversion Mixer with LO Buffer / Sw
MAX2041	ADI	获取价格	高线性度、1700MHz至3000MHz上变频/下变频混频器，带有LO缓冲器/开关
MAX2041_1	MAXIM	获取价格	Evaluation Kit
MAX20410	ADI	获取价格	具有10μA静态电流和双相能力的车用类36V、8A/10A全集成降压转换器

与MAX20404相关文章

英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

14
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
2024-11-05

12
三星深化印度制造布局，供应链本地化进程加速
2024-10-29

36
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
2024-10-29

33

产品中心

服务支持

精选活动

关于我们

帮助中心

MAX20404

MAX20404 数据手册

与MAX20404相关器件

与MAX20404相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

MAX20404

MAX20404 数据手册

与MAX20404相关器件

与MAX20404相关文章

您还可以找

您在本页遇到什么问题？